Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

Replacing Front Discs & Pads


GIDDLEPIN
 Share

Recommended Posts

The pictures are not as sparkly and clean as a Haynes Manual but you should get the idea ;)

The description and tools are what I have used and these may be different to what is recommended so all work carried out by anyone else using the same tools will be at their own risk.

PUT HANDBRAKE ON

jack UP AND SUPPORT CAR

REMOVE WHEEL

RoadsterFrontDiscsPads001.jpg

BRAKE CALIPER

RoadsterFrontDiscsPads002.jpg

14mm RING AND OPEN ENDED SPANNERS WERE USED TO UNDO THE TOP & BOTTOM BOLTS ON THE PISTON ASSEMBLY

RoadsterFrontDiscsPads005.jpg

USE A SUPPORT FOR THE PISTON ASSEMBLY WHILE WORKING

RoadsterFrontDiscsPads007.jpg

REMOVE THE OLD PADS WITH ANTI SQUEAL SHIMS

RoadsterFrontDiscsPads009.jpg

HEAVY DUTY 17mm RING SPANNER FOR TOP & BOTTOM CALIPER SUPPORT BOLTS

RoadsterFrontDiscsPads010.jpg

WIRE BRUSH & CLEAN OFF PAD SUPPORTS APPLY VERY LIGHT COAT OF COPPER GREASE

RoadsterFrontDiscsPads011.jpg

REMOVE OLD DISC (IF THIS IS SEIZED THERE ARE 2 THREADED DRAWING HOLES)

RoadsterFrontDiscsPads012.jpg

OLD & NEW

RoadsterFrontDiscsPads015.jpg

REMOVE BRAKE RESERVOIR FILLER CAP AND COMPRESS PISTONS BACK

(I USED MY OLD TRUSTY PIPE PLIERS)

RoadsterFrontDiscsPads017.jpg

COMPRESSING THE PISTONS CAN CAUSE THE RESERVOIR TO OVERFLOW

I USED AN OLD BUT CLEAN SPRAYER TO REMOVE THE EXCESS

RoadsterFrontDiscsPads016.jpg

LIGHTLY SMEAR COPPER GREASE ON THE REAR OF PADS (NOT THE FRONT FOR OBVIOUS REASONS)

DO THE SAME WITH THE ANTI SQUEAL SHIMS AND ASSEMBLE

RoadsterFrontDiscsPads018.jpg

ALL DONE

RoadsterFrontDiscsPads019.jpg

LAST BUT NOT LEAST LIGHTLY SMEAR COPPER GREASE ON THE FLANGE FACE OF THE WHEEL (Just for you Davey ;) )

RoadsterFrontDiscsPads020.jpg

AFTER REPLACING WHEELS PRESS THE BRAKE PEDAL UNTIL IT TAKES UP THE GAP ON THE NEW PADS

From removing the wheel to stripping, cleaning and assembling all parts then replacing the wheel took me just under fifteen minutes.

Doing this job is not a race so take your time and do it safely :thumbsup:

Les

Link to comment
Share on other sites


Thanks Les for taking the time to photograph the various stages of your disc swop. You are a five-star Club Manager!

Members I'm sure will be very grateful for your thoughfulness.

So, thanks again - and don't forget to wash the grease off your hands before eating those - well deserved - Easter eggs!!

Regards

Dave C

Link to comment
Share on other sites

  • 1 month later...

Whilst doing this its alwyas a good idea to check the slider pins are free moving. Removing cleaning and regreasing is best.

Good guide though!

Mart

Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership