Getting some 7x17 ,44 offset,pcd 114.3 for an MR2 Rev 2 Turbo.
Can i just ask if the Fittment is right for it?
According to the website http://www.rochfordtyres.co.uk/Fitment.asp?psearch=Toyota
The PCD is 114 and offset is 35 - 42. So how can i make up the offset to 44?
Cheers
Full Version: Mr2 Pcd And Offsetet
Your fitment is right. There's not a 114 x 5 PCD... it is 114.3 x 5 PCD.
You might be alright with a 44 offset. At worst you'll need 2mm-10mm spacers!!! I doubt you'll foul on the calipers or suspension with a 44 offset... especially as they're only a 7J.
You might be alright with a 44 offset. At worst you'll need 2mm-10mm spacers!!! I doubt you'll foul on the calipers or suspension with a 44 offset... especially as they're only a 7J.
Will they not put too much stress on the bearings having that offset? I reckon they will and you'll have to get new wheel bearings like every couple of months! 
QUOTE(Ryan1985 @ Jul 16 2005, 08:54 PM)
Will they not put too much stress on the bearings having that offset? I reckon they will and you'll have to get new wheel bearings like every couple of months!
[right][snapback]389937[/snapback][/right]
[right][snapback]389937[/snapback][/right]
Nope... you'd be worse off the other way... i.e. if they're a 30 offset.
A 44mm offset brings the wheel nearer to the car.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.