Glanza Remote Locking

[tspirit888]

can anyone help

i bought a new remote for my glanza central locking

but no idea how to reprogramme any assistance would be very helpful

[tspirit888]

can anyone help

i bought a new remote for my glanza central locking

but no idea how to reprogramme any assistance would be very helpful

:( :( :( :( :(

surely somebody can help me

[Hou]

Well this is how it works on a pareo, should be same hopefully:

these were the instructions on ukseoclub posted by various people, they were saved to my computer so for any ones future reference here they are.

Number 1-

Right, found the reset codes online, for everyone who may experience this problem, to reset the alarm:

Open key fob, so the buttons are detached from the Battery, press unlock - lock - unlock - lock - unlock etc for about 10 seconds to complete discharge the Battery, then put it together, hold LOCK for about 10 seconds, then press unlock, and it should work

Remember, the Battery has a 10 minute memory, ie if you open it and the battery is out for 10 or more minutes, you will need to pay toyota £71 to do that, or do it yourself

Number 2-

Right, the official Toyota Key Fob programming guide.

Used for when you need to code a new fob or recode an old one, NB: If you code a new fob the old one will no longer have the correct code!

1. Find the alarm ecu, located behind glove box, cable tied under dashboard to the left (not the engine ecu you see directly in front of you!).

2. Remove cable ties carefully allowing access to unit.

3. You will see a bracket on the unit that is held on with a screw at one point and a rivet at the other.

4. Remove the screw allowing the bracket to move on the axis of the rivet.

5. You will see a small green coloured button.

6. Turn ignition to 'acc'.

7. Use a small pin, needle or similar to press the green button till you hear it physically click in.

8. Press and hold both buttons on the remote fob for several seconds until you hear the alarm ecu 'click'.

9. Your new key fob should be now coded to the vehicle, test then replace alarm ecu with new cable ties.

10. Have a cigarette and sit back reflecting how you saved yourself a fortune for 10 minutes work