Installating Parrot Ck3100?

[asadrehman]

I have an Aygo and a CK3100 bluetooth kit by Parrot I'd like to put in. The installation diagram seems pretty straight forward, But.

Can someone give me a quick guide on how to install it?

Is there enough space for the blue box? Where should I put the LCD and Mic and where should I run the cable thru?

oh and how do I get to the ISO connections on the rear of the head unit?

[Jan van de Wouw]

Where you put the parts depends on your personal preference.

The bluebox fits below or behind the radio without problem.

To get yourself some space to work take out the entire panel with the radio in it.

Take off the blower knob with a little screwdriver opposite the indicator,

undo the screw that's revealed. Now pry the panel upward, starting at the knob

and working your way up both sides. when you've got about 4" clearance undo

the three plugs to the switches, rotate the panel up to unhook it and to

get to the ISO-plugs on the bakc of the radio.

These plugs are keyed, so you can't hook them up wrong. You DO have to open up the

fuse holders and swap over the halves to switch over permanent and switched power.

The yellow mute-line does NOT connect to the ISO's, you can use

everything without it being connected, if you DO want to connect is,

get yourself a yellow mini-ISO and put the yellow wire on position 5.

If you take your time it's possible to run both the mic-

and LCD-cable through the seams when you refit the panel.