Hi 3Sgte Corolla Newbie

[Alanv]

Hi my Name is Alan,

I'm from Donegal in Ireland and I'm building a 3sgte 4wd corolla.

Great site, signed up along time ago but never put up a intro.

http://toyotaownersclub-irl.forumotion.com/project-section-f5/3sgte-4wd-corolla-t1092.htm

[GIDDLEPIN]

Better late than never Alan ;)

Welcome to the club

[Alanv]

Thanks Giddlepin

Heres a few pics of the Corolla

ST185 floor pan

Century motorsort 3sgte

Gt4 rear subframe

RS500 Anti-roll bar

For more go on

http://toyotaownersclub-irl.forumotion.com/project-section-f5/3sgte-4wd-corolla-t1092-0.htm

[jw67]

Awesome looking Corolla mate.Definately my favourite version by far of all the Corollas over the years

Welcome to the club too

[john905]

hello and welcome, thats 1 serious project you got there mate, what sort of power you going to be running?

[Alanv]

@ John this engine is from Nathan Frekes World record mr2, so its 900fwbhp with 119ron, nitrous @ 2.2bar which enough I think

[john905]

@ John this engine is from Nathan Frekes World record mr2, so its 900fwbhp with 119ron, nitrous @ 2.2bar which enough I think

f**k me that thing will shift, i see the mr2 a couple of years back, sure it done a 9 sec 1/4 mile, as said all the best with it keep us updated cheers john

[dawesy]

f**k me. are you sure that turbo will fit under the rolla bonnet?

i had an IHI RX6 on mine that wasnt as big as that and that was a tight squeeze.

good project though and at least your 4WD.

[john905]

f**k me. are you sure that turbo will fit under the rolla bonnet?

i had an IHI RX6 on mine that wasnt as big as that and that was a tight squeeze.

good project though and at least your 4WD.

good point lee, that is one massive turbo

[bothwell_buyer]

is the chassis etc fit to hold that engine power in??? I spoke to one chap who ran a 3sgte at 700bhp and it tore itself out of the car mountings!! (Was in an MR2)