Removing The Wing

[ZeroBlade]

I searched thru all my sites of technical / workshop manuals, googled also but couldnt find out how to remove it.

I had a go earlier on 2day and managed to get pretty much all of it off. i'm sure there's a few screw/nuts,whatever at the front bit near where the wing joins the bumper, but i couldnt remove the little bit of trim, it seems to be held on by something. i didnt want to pull at this too hard as i managed to snap another piece of the trim whilst removing it :ffs:

Ne1 point me in the right direction, or describe the procedure?

cheers,

-Z

[mattmr2]

You need to remove the headlight to get to the rubbin strip and to dettach the wing from the bumper. Don't force the wing as its held on if a few bast*rd places it should just drop off. There is one bolt in particular about half way down the door thats fiddly. Don't forget its also attached at the base sill aswell.

Hope this helps,

Matt.

[ZeroBlade]

!Removed! hell, had to be the fiddly bit didnt it!

cheers for that m8.

i did have an inkling that the headlight had to come off, but wasnt sure so tried not to make more work of it for myself!

thanx,

-Z