Aygo Obd

[Sinan Awad]

Hello,

I have a 2011 Peugeot 107, as far as I understand I use the same ECU as the Aygo.

1. Has anyone tried this on his Aygo? Tried it in my Peugeot with no success.

http://www.resettools.com/v-checker_a301_trip_computer

2. Looking at the OBD pinout, it seems very strange

since the Aygo is ISO9141-2, the pins that should be connected are 4,5,7,15,16. (gnds, K line, L Line, and voltage)

Looking at the connector it seems pins 9,12,13 are also connected while 15 is not (L line - it's optional so OK)

I looked into the forums, couldn't find a discussion of the OBD connector in the Aygo. If I missed it, please point me to it.. :-)

Any information would be appreciated.

[S_J_P]

That looks cool!

I use a Scangauge which uses the OBD port without problems, it's similar in function to the V-Checker, but nowhere near as configurable.

[Sinan Awad]

I bought this and tried it, it doesn't recognize my 107. Tried it on my Peugeot307, Skoda Octavia, and Kia Forte and it worked.

I looked into the Scangauge, people with 107 have used it successfully.

Either:

- My device is defective

or

- It doesn't support Toyota ISO9141 correctly.

or

- My Peugeot's OBD connector is faulty.

If someone has experience with this trip computer I would appreciate inputs.

[Geriatric]

You could also try.

http://www.c1oc.co.uk/forum/index.php

[Sinan Awad]

You could also try.

http://www.c1oc.co.uk/forum/index.php

Thanks I will try posting there too.