Trd Quickshift Installation

[Jimlad]

Can I do this myself ? Is any welding etc required ?? ( not had a look yet )

thanks !

[mattmr2]

Fairly simple job - i think you'll be alright.

[Jimlad]

easy to do then ? Take one off and put the other on basically ?

[mattmr2]

yup, you will need to remove some trim and then its a case of swapping the cables over and bolting it in place - simple.

[Jimlad]

sweet... will give it a bash

[ZeroBlade]

isn't the quickshift just a shorter gear nob bit?

kinda like the l8r model '2's.

On our model (rev1) it's a long thing which is just askin to get chopped in half to shorten it!

-Z

[Bibbs]

you can do it yourself .. it's not hard .. but the TRD one is bent lower, is shorter and has a different mounting point ..

and apart from my TRD oil cap and rad caps .. it was probably the easiest mod to install :)

[Jimlad]

gonna go have a play with it now

[Jimlad]

I looked at the instructions and noticed you had to take out all the middle bit between the driver/passenger seat.

F*ck that sh*t .... lol. Will do it another day.

[Bibbs]

it's a 15 min job mate ..

[Jimlad]

I'll do it tomorrow..... at least I mastered the art of fitting a BOV

[ZeroBlade]

mite have 2 get me one of these in the future then i guess!

-Z

[Roytoner]

I'll do it tomorrow..... at least I mastered the art of fitting a BOV

Well it's tomorrow Have you fitted it ??

[Jimlad]

nope... didn't have time.. was driving about in the sun with the roof off !!

Tbars rule !

[Roytoner]

nope... didn't have time.. was driving about in the sun with the roof off !!

Tbars rule !

You will tell us owt ( yes I am from Lancashire ) :D

[midmotorsteve]

a cheaper way is to buy a rev2+ shifter from eBay for about £20

[Roytoner]

Jim Can you stick a pic of it up so I can see the differeance between it and my std short stick please Ta Paul..

[Jimlad]

will do when I've done it... might do it today tho.