Difficulties Involved In Retro Fitting Cruise Control To A 2006 Rav Xt

[dave f.]

hi, I'm a new member,joined in march.I am wondering what the difficulties would be in retro fitting cruise control to my 2006 rav xt4?

[gjnorthall]

It's not too difficult because the XT4 is pre-wired for cruise control - it's just a case of fitting the clutch switch and the operating stalk. The bit that needs a bit of patience to get it right is making a hole in the steering wheel cowl to accept the stalk. As well as the switch and stalk - you'll need 2 M4 screws around 10mm long to secure the stalk. Fitting the system and the part numbers are covered elsewhere on this forum.

http://www.toyotaownersclub.com/forums/topic/134401-43-toyota-cruise-control-retro-fit/?hl=cruise

The stalks used to appear regularly on eBay for around £25 but I haven't seen any lately.

[dave f.]

thanks very much,I'll get on to that as soon as possible