Starlet 1.3 M Brake Fitting

[procall]

Hello,

I need to change my brakes and was wondering if anyone has any diagrams I can look at.

If not am I meant to bleed the brakes or can I just lever them off?

Thanks

[whitestarlet]

ok jack car up remove wheel.

open bonnet and remove brake fluid lid

take out bottom bolt on the caliper think its 12mm head on it this will allow u to lift the caliper up round. take out pads (there may be wee spacers in there too) place pads back in then with a bar or pipe pliers slowly squeeze in the piston bein careful not to nip the rubber boot. put bolt back in wheel on car PUMP UP the brake pedal slowly till it is firm check fluid level and that u sorted