Amp Installation

[minhman77]

I'm new to this forum and hopefully i can get help from members. The reason i post this b/c i want to install an amp to my toyota camry 92. Since installing an amp we have to put that amp in the trunk so we have to run all audio ( input/output) and power supply from the receiver in the front to the back and i don't know how to run these wires. Does any one know how to run these wire please show me. Thanks !

[vmail]

Hi, welcome to the family...

is it an orginal headunit or aftermarket?

you need to remove the plastic trim and place the cables under there

[minhman77]

Thank you for your replied. That's the after market head. I've just installed the Kenwood head and the 2 front pioneer Speakers but the sound does not sound strong enough to me and that's why i want to add an amp.

[jaxx]

hi there!

youll need to run a fused power cable for the amp directly from the Battery and down to the boot

you will need and RCA phono lead to conect the amp to the reciever

a ground wire from the amp to a suitable point on the cars chassis/bodywork to earth the amp

Speakers wire to conect back to the Speakers

and a remote lead from the reciever that tells the amps to switch on when the reciever switches on (normally labelled as P.CONT or REM)

a commercially available amp wiring kit from a car electronics shop is the best way to go to ensure you have all the bits and pieces you require

[vmail]

Yaris Crashtest Guru

LOL