Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

Special Project (continue)


zivk
 Share

Recommended Posts

finally ,its almost done.

my 95 celica GTI was converted to ST205.

3S-GTE engine was installed,

T66 turbo (HKS) installed ,large front intercooler(HKS)

cylynders + all the components (JE) ,3.5 inch exhost system(HKS) ,

AWD system taken from ST205

,brembo 350mm vented fornt disk(costum made), Brembo 280mm vented disk(special made) ,eibach springs(40mm lowered), HKS chip ,

apexi boost controler ,and a motec master computer+laptop.

all of it costed 42K$ including installation and tuning(in progress).

the car isn't tuned so the dyno test will be next week ,but i can say one thing

it drives like hell.

before the celica i had 99 impreza 22B heavy modified (480HP) and my celica is

stronger even now before the final tuning.

the 3rd gear go till the 200kmh the 4th goes till 250kmh ,i was too fritned to check th 5th gear.

i'm waiting to see more projects like mine.

pictures and the dyno movie will be loaded after the final tuning.

Link to comment
Share on other sites

Sounds awsome---- :eek: ------keep us posted. :thumbsup:

i'll keep posting,

we're still tuning everything

i had a nice run today ,race with 911-turbo from 2nd gear roll ,

on 260kmh i was about 15-20meters behind the porsche,

by the way that porsche had a large work at "TTP" germany.

one more race will be next week when my baby will be tuned(i hope) ,

and then the 911 will see only my backfires :censor:

Link to comment
Share on other sites

hey all,

yesterday we finished tuning the car and i called the guy with the 911-turbo

for one more check (the 911 runs on 645 BHP - "TTP" modified).

lets say that this was the response of him : :crybaby: ...

two difrent runs, first one from 2nd gear roll (90 KMH - start)

i was about 40-50 meters in front of him (on 260 KMH).

second run from the spot i was about 15-20 meters in

front of him (on 240 KMH - end of the road).

photos and movies will be uploaded as soon as we'll make some,

by the way have'nt done dyno test yet but i belive i reached what i planed.

Link to comment
Share on other sites

:D ok i have the results of the dyno test

1) 623 BHP / 6580 RPM (30psi boost)

2) 662 BHP/ 6600 RPM (40psi boost)

its even more then i planed ...

G-TECH (timer)

0-100 - 3.6 sec

0-160 - 6.1 sec

qurter - 10.1 secs (208 kmh)

now i'm waiting to hear about other project ,

movie of the dyno test will be uploaded...

Link to comment
Share on other sites


!Removed! Hell. Thats faster than my speed triple.. Outstanding. Well done mate.

Just out of interest how much did it cost you? :)

Link to comment
Share on other sites

3S-GTE engine was installed,

T66 double ball-bering turbo (HKS) installed ,large front intercooler(HKS) ,

cylynders + all the components (JE) ,3.5 inch exhost system(HKS) ,

titnium menifold ,new high performance ignition system,

high performance distributor ,

AWD system taken from ST205 ,

Brembo 350mm vented fornt disk(costum made),

Brembo 280mm rear vented disk(special made) ,

Eibach springs(40mm lowered) , koni suspention ,

HKS chip , AEM high performance air intake + HKS filter ,

high flow fuel pump + 1000cc injectors ,

2 heat sensors in the exhost system ,

apexi boost controler ,and a motec master computer+laptop.

all of it costed 42K$ including installation and tuning.

Link to comment
Share on other sites

Where do you find the cash to fund such projects?

personally I find it worrying if someone spends 10Ks + on a private project.

Link to comment
Share on other sites

MUST BE NICE TO HAVE 10K TO SPEND ON A MOTOR NEVERMIND THE UPGRADES. :thumbsup:

Link to comment
Share on other sites

its nice , (its not 10K its 42K US$)

where do you find the money :censor: ,

projects like this is always expensive because you're not done after the

final tuning , you have to replace parts that you brake (street drags) ,

high fuel consumption ,oil ,and more.

the total amount of a project like this is not just to build it , its to keep it in good condition and tuned .

Link to comment
Share on other sites

so is your project car for personal interest or is it a company thing? just wondering if private projects can hit 42k$

Link to comment
Share on other sites


ok few photos :

1 ) before (the left one belongs to me the right one is friend)

020.jpeg

2 ) first stage

02.jpeg

3 ) in car shows

03.jpeg

04.jpeg

4 ) final ( sorry about the bad picture , new pics soon )

celica.jpeg

running on 2.3bar boost AWD T66 stage-5 turbo.... :D

Link to comment
Share on other sites

what no comments ? :(

I am real sorry that I did not post a comment celica ppl got to stick together.

very nice looking car, would look better in black :ph34r: IMO.

SORRY. :P

Link to comment
Share on other sites

is that what engine the car has now?

I thought it'd been swapped out for a 3SGTE? :unsure:

Link to comment
Share on other sites

nice 1 mate, u must be a proud father!

car looks nice and the spec sounds even better, must sound even better when u take it 4 a test drive

good luck and take care of ur baby :thumbsup:

Link to comment
Share on other sites

Um. Is it a bad photo or what. In the 1st photo it appears to be a narrow body.

Anyway. Enjoy :D

Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Support