New Key Programming for the Immobiliser

[dransfield]

Hi

Just picked up a new key from Mr T today, they wanted £50 to program it so thought I'd do it myself as its all online. I have followed what I thought was the complete procedure but have had only partial success, the buttons on the new key now work, they lock and unlock the car, however the key will not start the car, it just turns over so am guessing that the new key is not turning the immobiliser off. What more do I need to do to sort that bit out? I can see plenty of posts describing how to pair up for the door locking buttons (which I have already done), but nothing definite for an avensis immobiliser, just suggestions on what _might_ work, does anybody know or can point me to a post I've missed?

thanks in advance

Bryan

 

 

[yossarian247]

Although I've never done this on a Toyota I have on a few other makes, and whilst pairing the key for remote locking purposes is very easy, pairing it to the immobiliser usually requires dealer software. That's where they earn the £50!

 

 

On 4/26/2018 at 4:57 PM, dransfield said: