Corolla Gti Stainless Exhaust

[Unity Jon]

I'm making preparations for quite a few changes to my corolla gti and a new exhaust will be required (3" pipe for turbo !!) but in the mean time i am able to pass on my stainless Powerflow 2.25" exhaust (downpipe back) with twin rolled in 2.5"tips in exchange for cash and a replacement bog stock exhaust to keep the car mobile.

If you would like a performance, custom built stainless exhaust in exchange for your current exhaust plus £150 ovno drop me a line.

PM

or email jon@unitylowrider.co.uk

(club singing nova sounding exhausts need not apply - i dont do racket !)

[dawesy]

what engine are you putting in? if its a 3s-gte then i might be able to give you some tips as ive done this mod myself let me know

[Unity Jon]

4agze without super charger...... ;)

[TheNissanMan]

whats the difference between a 4a-gze without sc and a 4a-ge ???

[dawesy]

stronger pistons and lower compression are the biggest diference i think. still bit of an easy route to take. 3S-GTE is better tho 300bhp 0-60 aprox 5.4 embaraces impretza owners OH YEAH

[TheNissanMan]

300 bhp with a good couple of mods...

225 for the early ones and 245ish for the later isn't it ?

[dawesy]

engines from an ST-205 celica gt4 so yes 240-250 bhp but throw in a blitz air filter 3" exhaust system blitz de-cat pipe water injection with 50/50 water/methanol mix and motec engine management running 1.1bar = aprox 300-310 bhp and yes it is quik i had an st-205 chase me up the motorway the other day and he couldnt catch me!

ps should be at jae this year hopefully on fensport's stand

[Unity Jon]

No point in having a forced induction engine without forced induction, who on the planet would so such a lame thing ??????

no supercharger........ turbo. but Dawesy was on the right track with lower compression, ceramic pistons stronger rods and healthier bottom end in general as stock.

I also have access to a front mount intercooler rather than putting that stupid heat retainer ontop of the engine !!!!???????