Granvia suspension

[paddymanncan]

Hi all could somone point me in right direction, i have a granvia i need torsion bars but cannot locate any for granvia, does the hiace share parts with granvia

[flash22]

find the oem part number by your vin on the likes of megazip or drop me a PM with it, then it can be cross referenced

[RUToyota]

As Bob says...you can use such sites as megazip and toyoDIY for parts identification...just use your frame (VIN) number...and there should be good parts commonality with the Hiace.

[paddymanncan]

Thank you for reply, just so i know i am in the right direction i am getting a very loud crack and grinding noise when i drop down from the kirb and also when i turn on hard lock, at first i thought this was cv but it only happens as i say when dropping or hard lock, i have replaced wishbones both sides, drop links both sides, and ball joints both sides, to no avail, what are your thoughts the only other thing i could think was the tortion bars?

[flash22]

Front or rear ? Front i take it ? Have you checked the bushes ? Are the subframe bolts ok ?

[flash22]

A quick look shows 3 different numbers for the torsion bars

RH

48161-26310 or 48161-26320 or 48161-26340

LH

48162-26310 or 48162-26320 or 48161-26340

i take you have had it apart and inspected it ? i can pin point the part If you PM me your vin

[paddymanncan]

It is the front i have not checked subframe bolts but i will this week, when we changed wishbones we changed bushes at same time, i also changed shocks,it has left me scratching my head

[paddymanncan]

I am looking for my v5 to get vin

[paddymanncan]

got it  KCH100003633

[flash22]

Your a few digits short

[paddymanncan]

I have not taken it appart and checked all i have done is taken tension off to change the wishbones, i did measure threads to put them back as they were

[paddymanncan]

just checked that is the vin number engine number 1kz

[flash22]

Found it, never come across a 12 digit vin

[flash22]

Some info for you..

Production - 10/1995 Japan

Model - KCH10W-GFSQT

Engine - 1KZTE (3L turbo diesel with EFI)

Trans - ATM

Seats - 7

Grade  - Q

Colour - 2AZ (6K6 + 6L2)

 

 

 

Torsion bars

48161-26310 (rh) and 48162-26310 (LH)

Dust caps x2

48174-26010

[paddymanncan]

Thank you for info i will let you know how i get on regards Pat

[Hybrid-Harry]

Front or rear ? Front i take it ? Have you checked the bushes ? Are the subframe bolts ok ?