Lockwood Dial Kits For A Import Mr2

[wyldeSR]

Right peep's

need i bit of a hand with this one, i got my mr2 g limited import j reg

i have been looking at changing the dials and getting some lockwood white dials

the only prob is which one's to get.

the guy told me when i bought the car, i had been converted into mph, but the speedo is still in KMH, its just had the 'K' removed, its shows 180 on the clock

which i thought was a bit to high for a N/A

This leave,s me a bit in the dark, due to ***** speed camera's i need to know which speed i am going,

checked with lockwood and there dial's show 110mph which is a bit low i find for a mr2 2.0 NA

so if anyone can shed light on which one's to get , this will be great

wylde sr

[spaceman]

why not make some custom ones www.speedhut.com

mine arrived this morning :)

[houston]

http://www.imoc.co.uk/technical/howto/whitedials.htm

not very good on night though, but u could use it to see what dials you need

[houston]

are u sure that it hasn`t got a converter fitted?

[TheKipster]

I got a L' Reg G-Limited Import - Mine goes to 180 so sounds like you have the same as mine. I'm looking into getting the following -

http://shop.carnoisseur.com/shop/products/...090/viewProduct

This is assuming that it has been changed to MPH (Recalibrated). If not, have a look on the other dials on there as they do the lot.

[SMiFFAD]

If your odo is clocking up in miles, its been properly converted.... unlike mine which to all intensive purposes still runs 100% KM, its just had the speedo face chanegd to MPH (so only goes to 110 - and is still limited, doh)

Speedhut seem nice peeps, i contacted them about getting dials for mine (being difficult as they dont make a 110MPH na kit... but were willing to do a pic n mix for me! :D )