OEM 15" Wheel spec

[Guest]

Anyone know what the spec is of the OEM 15" wheels on the mark 2?

Width = ?

ET = ?

Obviously the stud pattern is 4x100, and the centre bore is 54.1mm

[TonyHSD]

Hi, you can check here: https://www.wheel-size.com

[Guest]

18 minutes ago, TonyHSD said:

Hi, you can check here: https://www.wheel-size.com

Thanks, that was perfect 👍

The reply from the toyotaofficalstore on eBay was less than helpful and didn't answer ET or wheel width - two of the main things I asked about  👎:

Quote

Please note centre cap does not come with this wheel.
Wheel locks PZ413-99686-00
Lug holes 4
Recom air valve According to ETRTO (V2.03.1) (V2.03.2)
Recom balance weight Hoffman-type (lead-free)
PCD (mm) 100
Finish Machined
TPMS Indirect type
Tyre size Tyre : 165/60R15

 

[TonyHSD]

Hi, I bought from them and they were actually good with me, even exchanged one of the wheels as had arrived damaged. , perhaps they had no correct answer to your question and didn’t want to look at it. Best to check yourself and if they have something suitable no worries to buy from them.  👍

[Guest]

15 hours ago, TonyHSD said:

Hi, I bought from them and they were actually good with me, even exchanged one of the wheels as had arrived damaged. , perhaps they had no correct answer to your question and didn’t want to look at it. Best to check yourself and if they have something suitable no worries to buy from them.  👍

I don't want new wheels (mine are only 6 months old and I like the OE look), but I wanted to know the wheel width and offset so I knew what the widest tyres that would fit are.