Fitting Rev Counter 2010 Aygo MK1

[NoBrakesWC]

Has anyone fitted a rev counter on a MK1 Aygo? Any steps to fit one? Would love to fit one to my car but don't know how difficult it is. 

[haelewyn]

This could be helpful :

 

 

 

[steveo3002]

very easy , as per the video 

[Catlover]

It should be very doable. The wife had a 56 plate C1 and the model she chose had a rev counter as standard, like an eye popping out from the steering wheel.

[Puglet]

Might be an idea to remove the speedo cowling and check you got the wiring and connector for the rev counter before buying one, easy to do and saves a lot of aggro. Your vintage Aygo should be ok, but know at some point not all bugs had the wiring/connector, so worth checking. While cowl is off just check it got the rev counter cut out marked, think they are, so you can cut your existing cowl if you only get a rev counter without the pre-cut cowl. 

[NoBrakesWC]

Thanks guys for the replies. I will check if it has the wiring and stuff and I’ll go from there. 

[steveo3002]

99.9% it will have...very late ones might not

be carefull you dont buy a diesel one by mistake

[NoBrakesWC]

On 10/18/2021 at 8:39 AM, steveo3002 said:

99.9% it will have...very late ones might not

be carefull you dont buy a diesel one by mistake

Didn't know they made a difference. Thanks for the heads up. Have 60 Reg Aygo so in the middle of the production I think. (might have some more models for you to paint 🙂 )