Boot cylinder lock

[N M]

Toyota Augo 3-door 1.0 2008 Reg. Boot cylinder lock jammed. Latch works fine (opening from inside the boot). Can't seem to be able to get a new lock (with keys) or cylinder barrel (again with keys). All breakage yards can offer is the latch. Any ideas? Thank you

[flash22]

Does the lock move at all ? Have you tried cleaning the lock (key hole) out with wd40 ?

You may have a bent arm, lock and key is 69055-0h010 only the very base models had boot locks

[N M]

Thanks, Bob

Tried WD40, no luck. Dealer asks for £120 for new lock (and keys); I gather I will have to take the cylinder out and look to see if an arm is bent or a spring is broken. Thank you for your suggestion; yes, it is the base model.

[Puglet]

Know a few people who have had a new lock 're-built' to match existing keys on these cars, so another option. 

[Cyker]

Yeah, they're just wafer locks so isn't actually too hard in theory - The trouble is there don't seem to be many 'real' locksmiths (As opposed to key cutters...) around these days who would be able to actually do it!

 

[flash22]

Remove the lock from the car, and strip it down, no problem re pinning a lock if you can get a barrel in the first place

Has someone put superglue in the lock ?