Yaris front parking sensor repair

[LeoW]

Hi everyone. I need some help about cable wiring, to repair my Yaris front parking sensor.

First I would like to say thank you to @Devon Aygo for posting the installation instruction PDF from another post. With his document, I know the part number of the sensor and ordered a new pair.

However in my car, the parking sensor cable is broken as well. According to the instruction, the calbe has 4 connectors. Connector at position U4 is missing.

Pictures of connector at position U3. 4 of 6 cable is connected:

Picture of connector at position U1. 5 of 6 cable is connected:

For the conenctor, I find https://www.auto-click.co.uk/7283-8850-30 which I guess is same as U1-U3.

For the cable wiring, I notice that the cable connect to the connector are all different for U1-U4. Do anyone has a picture, or diagram, can guide me to wire the connector at postition U4?

Thanks,
Leo

 

 

[flash22]

u4 is missing ? what do you have, just a bare end ?

Follow the cable, make sure it hasn't been pulled, i do have a loom but will not have access to it until tomorrow

I take it you have traced the loom and made sure it hasn't been tucked up out of the way

[LeoW]

Sorry the photo is not in right focus. It just 3 wires there now.

[flash22]

Is the connector on the sensor ? i will dig the loom out in a bit

[LeoW]

no 😞 and the sensor head is broken.

I can't find any place that I can order a new cable (whole cable with all the connectors), thats why I am trying to fix the cable myself.

Thanks for helping.

[flash22]

Bear with me, I'm trying to ID this connector

[flash22]

TPA Kit part No. PW501-0D100

Connector U4 - they are all the same plugs, just wire differently

Found them - Yakazi RH series

https://www.auto-click.co.uk/7283-8850-30

Min order of 5

 

 

[LeoW]

Mnay thanks! Let me order the connector to try it out.