Diamond Clear Corners..

[Jimlad]

Ok.. anyone know where I can get a set of clear diamond corners fast ??

Either someone has stolen the small part of the corner from the driver side of my car or it's fallen off. Either way I'm annoyed and need a new set fast.

Thanks for any info. Next day delivery would be ideal !

[ricomr2]

Have a look on e-bay mate but i cant see you getting them for tomo :(

Who would steal it? yours is the only mr2 in gala mate...

[Jimlad]

I was in Edinburgh today... but I doubt it was stolen. Most prob fell out somewhere as it wasn't too secure. When I get a new set I'm gonna see if I can get them to fit any better.

Bibbs... how did you get yours to fit in the border bumper so well ?

Ricco... 2mw is off mate.... :( can't go with bits missing... lol.

[Jimlad]

there is a site which sells them quite cheap, but I can't find it for poo.

[Jimlad]

sod it .. ordered from DZdesigns

[russell]

The little white plastic grommet thing in the sidelight/ indicator tend to break.

Its the bit what the prong on the bit you'v lost goes into. They seem brittle, so break easily, mine did so i replaced them with the ones out of the original indicators, they seem more flexible.

Russ

RMG Developments

[Bibbs]

Bibbs... how did you get yours to fit in the border bumper so well ?

Matt whacked in a 10mm bolt and then put a 1 inch suqare peice of sheet ally behind the bumper and basically bolted the whole damn thing to the bumper ..

to get the lights out I undo the bolt behind the light and it all pops out ..

[Jimlad]

I'll have a play when I get my new ones to see if I can get them to fit any better. May even use a dab of glue... not like the car at JAE which had glue all around the edge of the lights.... lol.

I'm not loosing another one at £80 for a new set !

[Bibbs]

use the stud and plastic hole off the stock units .. the dimond ones are pony ..

[Roytoner]

Jim which side have you lost??

[Jimlad]

:( .... I don't have the stock units anymore !!..... :(

Will see what I can do when I get the new ones. I think it fell off because of when I knocked the bumper. Probably knocked it loose slightly as the bumper has moved a bit.

Lol.... I'll do what I did with my number plate on the bomex bumper... Super Glue the bugger on !

[Jimlad]

Jim which side have you lost??

drivers side mate... y ..... you got spare one ?

[Bibbs]

Super Glue ?? oh dear ..

Should have used double sided tape fella - at least that comes off ..

[Roytoner]

Think so I will got to the garage am and look..

Can you wait till then or have I to get WET again and look now??

[Jimlad]

look now... look now !!...

you gonna pull one off another car ??... lol

Just take a screwdriver and take the whole set off.... lol... :!Removed!:

[Roytoner]

GOING NOW

no I have a spare in the garage

[Jimlad]

lol.... ok.....

Let me know mate.. I'm off to work in about an hour.

If you do have a "diamond clear" spare one I'll just cancel the order with dzdesigns first thing monday. I'll sort you out as well.

It's the small part of the driver side one..... ooooh... hope you have a spare !

[Roytoner]

SORRY...

IT'S THE N/SIDE..

You could have had it if it was the right side..

Paul

[Jimlad]

damn !!... thanks all the same tho.

[russell]

use the stud and plastic hole off the stock units .. the dimond ones are pony ..

EXACTLY!!!!!!!

Just what i'v done

Russ

RMG Developments

[mattmr2]

Ahem..... we sell them, £55 a pair jim................

[Jimlad]

AH FFS !!!!

I'll order some monday and cancel the order with demon tweaks... you can send me that fog bulb thing at the same time... :D

[JappyBeast]

£55 for a set of diamonds?...