Fit Cruise Control To Your Estima in 30 minutes for £10!

[Lexus/ToyotaFan]

As per the title, Fit Cruise Control To Your Estima in 30 minutes for £10! Video instructions below!

This is for the 3rd-gen Estima (2006>), and mine is the Hybrid version. It may also work on the Previa and Tarago and non-hybrid models.

I fitted cruise control to my old 2002 Rav4, and was curious to see if it worked with the Estima, and it did!

Under £10 for the cruise control lever, and around 30 minutes of work. No skills needed! 

If you enjoyed the video or found it helpful, please give the video a thumbs-up and subscribe to my channel to support it please 🙂

Thanks,

Chris

 

 

[Crickleymal]

Unfortunately my 2008 Aeras doesn't have those blanking plates behind the steering wheel.

[Lexus/ToyotaFan]

On 4/18/2024 at 4:59 PM, Lexus/ToyotaFan said:

As per the title, Fit Cruise Control To Your Estima in 30 minutes for £10! Video instructions below!

This is for the 3rd-gen Estima (2006>), and mine is the Hybrid version. It may also work on the Previa and Tarago and non-hybrid models.

I fitted cruise control to my old 2002 Rav4, and was curious to see if it worked with the Estima, and it did!

Under £10 for the cruise control lever, and around 30 minutes of work. No skills needed! 

If you enjoyed the video or found it helpful, please give the video a thumbs-up and subscribe to my channel to support it please 🙂

Thanks,

Chris

 

 

Interested if anyone actually used my video to do this? 

[ErikssonA]

Hi Chris. I tried this upgrade due to your post.

So far I have been unsuccessful 😞

I have bought the cruise control stick and new connector at the steering wheel, so all signal should be good from the steering wheel.

I am a bit stumped what to do now.

When I press the button to activate the cruise control nothing happens in the dashboard, no indicator that the CC is active.

Any ideas?

//Alexander

[ErikssonA]

On 5/3/2024 at 4:41 PM, Lexus/ToyotaFan said:

Interested if anyone actually used my video to do this? 

Yes, see my earlier reply. I am new to this forum, sorry for my multiple replies.