Finding repair manual for Lighting system terminals ECU

[carllitos]

Hi guys, I've been looking around for a while now hoping I could find the repair manual for this lighting system terminals of ECU.
I did find one, but it was not fully describing what the cables connections were for if someone can provide me with this I would appreciate it very much or refer me to a website where I can buy this repair manual, I'm pretty much desperate now 😮‍💨

This is all the information I could find about these connectors (see images).

Thanks so much! 

[flash22]

what are you trying to do ? do you have auto lights? do you have smart entry and keyless start

[carllitos]

1 hour ago, flash22 said:

what are you trying to do ? do you have auto lights? do you have smart entry and keyless start

Well, the first thing is I am trying to figure out what all those connectors 3A and ending with 3Q do. that's my first curiosity.

[flash22]

it's not just for lighting it's the instrument panel junction box, fuse box and B-ecu (BCM) combined basically it runs half the car

this may help

KGB40 FB and RB.pdf

 

[carllitos]

16 minutes ago, flash22 said:

it's not just for lighting it's the instrument panel junction box, fuse box and B-ecu (BCM) combined basically it runs half the car

this may help

KGB40 FB and RB.pdf 1.2 MB · 0 downloads

 

Yes, I basically figured that out too, but my main point is just to understand where the connections are for the lighting system. (tail, light, headlight dimmer, fog, auto sensor, auto switch, etc.) The PDF you send shows a partial of this, but I need to check it out thoroughly. I do appreciate it.

[flash22]

you can not add auto lights to a car with normal lights. the cable harnesses and bcm are vastly different

That PDF will give you a big clue as to where to look

[carllitos]

14 hours ago, flash22 said:

you can not add auto lights to a car with normal lights. the cable harnesses and bcm are vastly different

That PDF will give you a big clue as to where to look

True i have seen it, but I do have an idea how to make it work but need to test it out. It helps knowing the diagram. Definitely let you know what i did and how it works. If it works 🫨