2005 Aygo Additional Speakers

[carmoddernoob]

Dear Community

I would like to add some additional Speakers to my Aygo from 2005. I have a problem with the speaker connector, the side on the radio has 8 flat male pins where a plug can be inserted. On the plug i now have to insert the new 4 additional cables (r+, r-, l+, l-). I now need to know what size of crimp i need for this. I have a crimp tool and already crimped some cables for small cables i used for arduino breadboard projects. But the crimped cables of the car audio system seem to be bigger.

Does anyone know what type of crimp terminal / crimp connector i need to then be able to plug the crimped part into the plastic plug?

Any help is appreciated!

[flash22]

if it's the factory radio you may find the rear Speakers are disabled

 

the connector you have there is a standard ISO plug

Google "8 pin iso plug"

 

the best upgrade is to fit 2 way components 6.5" speaker in the door and fit the tweeters in the dash

[carmoddernoob]

Hello flash22,

Thanks for your input.

So i tested if the speaker would work if i just hold the cables in place so that they have a connection to the male pins. And they work, which means the rear Speakers are not disabled by default :).

After using the search term '8 pin iso plug' i actually found something promising.
https://www.ebay.co.uk/p/1266415965

[flash22]

some cars only have the front channels enabled (Factory radio), yours is an early Aygo

I didn't post any links as you profile says non UK