Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

Dyno Graphs - Post Yours Here


midmotorsteve
 Share

Recommended Posts

Heres mine - guestimate flywheel figures. Actual 206bhp at the wheels

226bhpmillway1.jpg

226bhp /230lbs

1992 rev2 turbo

AVC-R running 12psi

APEXI HYABUSA EXHAUST (cat back)

HKS powerflow filter

Magnacor KV85 leads

HKS iridum plugs

Link to comment
Share on other sites


206bhp /235lbs

1991 rev1 turbo

G-valve at 0.8bar (12psi)

Blitz similar decat (BIG MISTAKE - should get 3inch downpipe)

Magnacor KV85

Denso grade7 plug

HKS SSQV

Link to comment
Share on other sites

237.5bhp

219 lb/ft Torque

1994 Rev 3 GTS Totally standard but with boost problem...

These figures were achieved with only 7.5Psi of Boost. :rolleyes:

Link to comment
Share on other sites

1990 Revision 1 MkII GT Turbo

266 Bhp

251 lbs/ft Torque

TRD exhaust

Hypersports downpipe

Blitz induction

Grainger valve set to 15 PSI

Bailey DV 26 BOV

Paul Port FCD

Magnacor KV85's

HKS Iridium plugs

All good :thumbsup:

Link to comment
Share on other sites


Mines are as stated in my sig below @flywheel 313bhp 278lb/ft. Shweet! @wheels it is 257bhp 228lb/ft I posted up a graph ages ago when I got my remap in may but cant be azzed findin it. I think a graph is good because it shows what really matter imo not you peak torque but the average torque output to 7000rpm I hit peak torque at 4000rpm and it stays there till 6000rpm and only drops a little to the redline. Nice high flat curve.

Link to comment
Share on other sites

i'll post mine if you want, as its nearly a tubby. 308bhp (wheel slip on rollers actual more likely to be around 350bhp ) 313.7 lbft@ 4077 rpm. mods are:-

rev3 engine rebuilt with JE forged pistons

ported head and backs of valves smoothed

HKS 1.2mm steel headgasket

Blitz 850cc injectors

Fensport stage 2 CT20b Turbo

Blitz decat

custom 3" exhaust

ERL water injecton (50/50 water/methaol)

Blitz SUS air cleaner

MoTec M4 Pro ECU controling boost at 1.7bar mid range 1.65 top end

Link to comment
Share on other sites

i'll post mine if you want, as its nearly a tubby. 308bhp (wheel slip on rollers actual more likely to be around 350bhp ) 313.7 lbft@ 4077 rpm. mods are:-

rev3 engine rebuilt with JE forged pistons

ported head and backs of valves smoothed

HKS 1.2mm steel headgasket

Blitz 850cc injectors

Fensport stage 2 CT20b Turbo

Blitz decat

custom 3" exhaust

ERL water injecton (50/50 water/methaol)

Blitz SUS air cleaner

MoTec M4 Pro ECU controling boost at 1.7bar mid range 1.65 top end

:yes: Very nice.....smart choice of mods giving nice power, very cool :)

Cheers

KiwiMR2

Link to comment
Share on other sites

I think a graph is good because it shows what really matter imo not you peak torque but the average torque output to 7000rpm I hit peak torque at 4000rpm and it stays there till 6000rpm and only drops a little to the redline. Nice high flat curve.

exactly why I was hoping to see some graphs :D

Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Support