Bodykit For 2003+ Model Any1?

[Sal_187]

Hi, first post on these forums. Im proud to say i took delivery of a Toyota Yaris 1.0 GS VVTI T2 from my local dealer only about 2 hours ago and ive already got crazy ideas for it. I cant seem to see any bodykits for the phase 2. The only 1 i have come across is the Carzone one which i think is too low for the british roads. I was hoping someone could help me for some exterior mods? Also what is the right offset for 16" alloys to fit on this car and wot tyre spec should i get? Thanks in advance.

[Ryan1985]

Hi and welcome, I'm just up the road in Stewarton if u know where that is!

Anyway, there is a C-One kit available for it but be warned you need to have really deep pockets if you want it! And the offset for 16's is ET38 and i would go for 195 or 205/40 R16 tyres!

Also, its either a GS or a T2, same spec but the T2 is the facelift and the GS is the pre-facelift!

[T V O R]

Also, its either a GS or a T2...

Beat me to it!

[alanbradley]

Hi and welcome to the club!

I'm no expert. but Ive noticed that quite a few people change the headlights from Phase 2 to Phase 1 if they want to fit a bodykit. It seems that all of the fittings underneath to attach bumpers 'n' stuff are the same.

The T2 replaced the S btw - the T3 replaced the GS... :bookworm: (got to get out more )

Hope that helps and we'll see you at the next Scottish Meet.

Cheers,

Alan

[cfc1]

if you opt for the carcept kit... which i think is horrid..... the car must ne lowered so take that into account for the pennies

[cfc1]

if you opt for the carcept kit... which i think is horrid..... the car must be lowered so take that into account for the pennies

[Sal_187]

Thanks for the advice and for correcting me on the GS T2 issue. It is a T2 as its the facelift model i have. I know where stewarton is, never actually been there though. Jus got back from kicking the yaris around my area and i feel its pretty nippy for a 1.0! Ordered DTM style mirrors and i should be getting a set of rims shortly after christmas. Im willing to pay a quite a bit for a bodykit but i feel the C-One it far too expensive. I have seen the K-19 from Ibherdeisgn on some sites and the price is also reasonable however, im not sure if they have 1 for the T2. Im not willing to change front headlamps. I emailed Ibherdesign and they said it would only after mods then they emailed again saying it will fit however, i will have to do without the front foglamps. Can some1 clear this up with me please? <_<

[MillzE]

Thanks for the advice and for correcting me on the GS T2 issue. It is a T2 as its the facelift model i have. I know where stewarton is, never actually been there though. Jus got back from kicking the yaris around my area and i feel its pretty nippy for a 1.0! Ordered DTM style mirrors and i should be getting a set of rims shortly after christmas. Im willing to pay a quite a bit for a bodykit but i feel the C-One it far too expensive. I have seen the K-19 from Ibherdeisgn on some sites and the price is also reasonable however, im not sure if they have 1 for the T2. Im not willing to change front headlamps. I emailed Ibherdesign and they said it would only after mods then they emailed again saying it will fit however, i will have to do without the front foglamps. Can some1 clear this up with me please?  <_<

←

Basically you'll have to have the bumper cut where the teardrop is on the facelift headlamp...thats it, I've got a pic of the carzone on a facelift somewhere! Watch this space :)

EDIT:

Check out this old post for the carzone pics on a facelift, then you'll know what I mean where the bumper has to be cut slightly!

Here

[MillzE]

Oh forgot to mention the toyota splitter is pretty nice (Ive got it :D )

Some of my pics for ya:

Matt

[Envy Performance Ltd]

Hi and welcome to the club

alloys and lowering springs are good first mods. :D

Kevin

[monacular]

MillzE where did u get the front spoiler???

[MillzE]

MillzE where did u get the front spoiler???

←

Hi,

Its a toyota extra part, you can get it from a toyota dealer.

The part number is PZ402-B9443-AB, its £149

[Crisis]

Thats not a bad piece of kit for a Toyota Extra part.

Do they do that on the Mark 1?

[seveer unaek]

Thats not a bad piece of kit for a Toyota Extra part.

Do they do that on the Mark 1?

←

Yeah, they do, i've seen it in the accessories book that came with my manual.

[Crisis]

Cool worth a look see.

[MillzE]

Thats not a bad piece of kit for a Toyota Extra part.

Do they do that on the Mark 1?

←

Yeah, they do, i've seen it in the accessories book that came with my manual.

←

Its completely different for the phase1 and it replaces the bottom halve of the bumper

[seveer unaek]

Can't say i knew that! But i knew it looked different!

[Sal_187]

Thanks for the advice every1! Nice splitter u got there. Do they do like matching side skirts and rear splitter? If they do, ill be round my local dealer b4 u know it. I like a nice dicreet yet effective bodykit. Hate the carzone/carcept ones.

[MillzE]

I'm having the toyota side skirts fitted monday! :D Will post sum pix up then!

No rear skirt from toyota unfortunately

Matt

[monacular]

MillzE where did u get the front spoiler???

←

Hi,

Its a toyota extra part, you can get it from a toyota dealer.

The part number is PZ402-B9443-AB, its £149

←

thanks mate :D