Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

Recommended Posts

Posted

im going to colour code my door handles, whats the easiest way to remove em to spray them. thanks.

Posted

Im going to do this aswell.i think you get it from behind the door card :thumbsup:

Posted

There are 2 nuts behind the door panel.

So take off the door panel and remove the nuts.

Posted

in order to take the door panel off you need to do the folowing:

1. the bit of the door panel you actually stick your hand in and pul the door shut - remvoe that bit,

2. behind that there are 2 screws remove these.

3. on th einteror door handle there is a screw, remove that

4. push the interior door handle towards the front of the car and pull out slightly

5. Unclip the rod from the interior door handle. don't just try and pul it out

6. with a screwdriver or barbecue spatula works quite well go round the whole of the interior panel and pull the studs out.

7. now the interior panel is off, you need to carefully peel back the vapour barrier on the door

8. undo the two screws and pull the exterior door handle out.

9. disconnect the rod on the exterior door handle.

hope this helps

  • 4 weeks later...
Posted

Thought id drag up an old post ,but i tried to do this last nite,but noticed i can only get two one of the bolts? any1 else had this problem,i was thinkin maybe once one is un done it slides off if you get me an is more of a stud than a bolt

Any1 else done this,had this trouble??


Posted
Thought id drag up an old post ,but i tried to do this last nite,but noticed i can only get two one of the bolts? any1 else had this problem,i was thinkin maybe once one is un done it slides off if you get me an is more of a stud than a bolt

Any1 else done this,had this trouble??

you gotta make sure your window is wound fully up man, then you can move the window rail out of the way to reveal the second bolt, you can get to it with a spanner, its the exact same as the first one. The only tricky part is when you put the rods back into the handle as it has a little red bracket which it clips into. Its tricky but it can be done. I changed my handles to chrome so its all good.

peace

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Support