Hi Guys, Havent Been On In Ages

[cheeky_rick]

Alright every one, i havent been online since september.

Not really done alot to my paseo since i was last on apart from get a new number plate P6SEO

Quick pic of my car

I do have a problem tho, i have my MOT end of this month, and one of the abs sensors have gone, which has made the ABS light on the dash turn on. This will make my car fail its MOT. I was wondering if any one knew how i could get that bulb off just while my car was infor its mot??? is there a way to get into the dash and take out the bulb? Or a fuse i could take out which would just turn off the abs light and not all the other lights?

Hope you can help

Rick

[toyo in front]

:D HI, i don, t want to be a stick in the MUD BUT I WOULD RECOMMEND YOU GET YOUR SENSOR REPLACED ABS is a godsend it, s stopped me from customising my FRONT END on a few occations :D Your insurance could be invalid if bulb is missing NICE PIC S

[cheeky_rick]

yeah i know that and i do plan to get it replced in the next few months i just really cant afford to get it done at the moment especialy this soon after christmass...

[toyo in front]

:D You might do as i did :D Took car to toyota dealer and they found osf sensor fault

Paid £18 Then ordered part meself , best to use proper part,s it cost about £ 130 :censor: and that was trade If it is a sensor lead then it is quite easy to change the fixing bolt on the hub sheered OFF so had to drill out and replace with NUT & BOLT +locktight .ABS light went out :D Best of luck PS have you checked the lead connections.....

[cheeky_rick]

i already know that is the front passenger sensor, but i can afford to get it fixed at the moment, i just need a quick fix to get it through its mot...

[toyo in front]

I will have a look at my speedo wed ,s and see if i can help...

[cheeky_rick]

thanx

[cheeky_rick]

can any body help me?

[toyo in front]

SORRY did not have time today ,will b able thur s ..Just a point -----the MOT STATION COULD FAIL DUE TO NO ABS LIGHT SHOWING WHEN KEY TURNED

[cheeky_rick]

i dont think they would pic up on that...

[toyo in front]

This is what i found on my seo.... :D

There is a cover surrounding the speedo head -- Find the possi screw just inside the cover at the TOP --- remove screw then carefully pull the top and side,s of cover toward,s you----the bottom of cover is held in by push in clip,s--- Disconnect the R/Demister switch --- The speedo is held in by possi screw,s ----Now speedo is loose-- try pulling it GENTLY out ---The speedo CABLE may stop you getting to the bulb --- Put your hand Up by the pedal,s to where the head is and you will find the cable -find the end and feel for the release clip -THIS IS NOT ALLWAY,S EASY ------having done this then head will come a lot further out to gain acess to bulb... BE careful of trapped WIRE,S when putting back..... Hope this help,s ..

[cheeky_rick]

your a star!