Fuel System For Turbo 5sfe

[DSM-2-WRX]

Hi guys, I hate to spam forums, but I just wanted to let you guys know that I'm selling the following parts from my turbo 5sfe MR2. I am one of the few people to turbo this engine without engine failure, and I have proof of my setup in pictures and dyno graphs. I usually frequent the MR2 forums. Anyways, here's the info:

ERL MF2 AIC (additional injector controller)

2 bar MAP sensor for AIC input

(2) 440cc injectors

All necessary fittings, fuel hose, and wiring

UPPER IC PIPE (from IC to TB) with 2 bungs welded in for injectors

3-check valve device to fool MAP sensor (avoid fuel cut)

The AIC has already been dyno tuned for a turbo 5sfe, so you shouldn't have to worry about much (or any) time on the dyno. This stuff is still on my car, and I've used it for almost 1000 miles since the turbo install, without any problems. My gas mileage is about 26-28 mpg on average, and my engine compression is the same as it was before the turbo install, so it's tuned very well. I'm selling this since I'm bored and I figured I'd complicate things by going standalone (I know, I'm wierd). I'm looking to get $400 for everything, plus shipping. If you pieced the parts together yourself, it would cost well over $600, and then you'd have to tune everything (at least $100 more) and find someone to weld the fittings into the IC pipe and put everything together. This setup is pretty easy to install.

BTW, if you need more info about the ERL AIC, here's a link to the Aquamist website: http://www.aquamist.co.uk/cp/mf2/mf2.html . Turbonetics and FMax, large companies that makes turbo kits for Fords, Hondas, Mitsus, Supras, etc., uses this system in their $4k turbo kits.

I also have a spare 3sgte exhaust manifold for sale, and a spare 3sgte intercooler. I'll sell both together for $100.

You can e-mail me at mnavyac@hotmail.com . I prefer Paypal. Later.

Mark