Lowering My '2

[ricomr2]

Ok so i'm gonna buy some lowering springs but what i want to know is...

If i buy spring designed for rev3 onwards, will this lower the car further than

springs designed for 90 - 95 cars

Mine is a rev 1 and has rev 3 springs on it already

so its lower than standard anyway...

Both sets will lower the car by 40mm but if i'm right in what i'm thinking,

the rev 3 lowering springs should be about 10mm lower on my car...

Can anyone confirm this for me?

Going to order them tomo.

[ricomr2]

Any idea's peeps? I want to order them today....

[ricomr2]

Just ordered a set of Pi springs, got the 95-00 ones,

should lower it 40-50mm

Only £100

I've had Pi springs before and know there pretty good, should have them for tuesday...

[Jimlad]

be prepaired to scrape that bumper of yours !!! ... lol.

[Ryan1985]

Yeah Rico, I scrape my front bumper alot and I've got a Yaris lowered only 50mm on 15's!

[boundsw]

"Just ordered a set of Pi springs, got the 95-00 ones,

should lower it 40-50mm

Only £100

I've had Pi springs before and know there pretty good, should have them for tuesday... "

Where did you get these springs from. <_<

I have a rev 1 mr2 turbs and am lowering next weekend !!

[dogma]

Please help.

I bought a set of 40mm Pi springs 90-94 and fitted 'em on my 94 mr2 on saturday.

Trouble is, the car seems to be sitting at the same height as before!!

I checked the tech. spec. - ground clearance is 135mm so i measured mine. Ground clearance is about 130mm.

Anyone any ideas why? I have lowered other cars 40mm in the past and the difference is quite obvious, but not this time.

Thanks for reading.

Si.

[Jesus]

Please help.

I bought a set of 40mm Pi springs 90-94 and fitted 'em on my 94 mr2 on saturday.

Trouble is, the car seems to be sitting at the same height as before!!

I checked the tech. spec. - ground clearance is 135mm so i measured mine.  Ground clearance is about 130mm.

Anyone any ideas why?  I have lowered other cars 40mm in the past and the difference is quite obvious, but not this time. 

Thanks for reading.

Si.

←

Do you know for sure that the car hadn't already been lowered?

I put a set of Eibach springs on mine (-30mm) and it only dropped about 5mm! Doh.

The guy that had the car before me in Japan had already put -25mm springs on it!!!

[ricomr2]

"Just ordered a set of Pi springs, got the 95-00 ones,

should lower it 40-50mm

Only £100 

I've had Pi springs before and know there pretty good, should have them for tuesday... "

Where did you get these springs from.  <_<

I have a rev 1 mr2 turbs and am lowering next weekend !!

←

I got them from a local motor factors... Was quite surprised by the price myself.