Indicators Don't Work?

[mr2-79]

I am new on here as i have only just bought my MR2, i bought it with a slight bump on the front with the indicator smashed. I have replaced the indicator lense but none of the indicators work on either side, all the fuses are ok and the hazzards work so i am clueless on what it could be. Has any one got any ideas?

[Bibbs]

The indicators are in the same loom as the hazards - if the hazards work, the indicators should too ..

[houston]

yeah could be harness behind hazard switch, if this isnt connected then they wont work

[Jimlad]

but if that was the case the hazards wouldn't work either.... very weird.

[mr2-79]

could it be a relay? i am totaly lost at the moment and i want to take it for the mot but obviously can't without indicators

[Jimlad]

the same relays would be in use with the hazard switch pressed down. So if the hazard works... the indicators should. ( but obviously not... for some reason... lol)

[boundsw]

may be the stalk on your stearing columb is not conected or damaged ?, take the cover off and have a look if your up to it !