Mr2 Pcd And Offset

[Billy C]

Getting some 7x17 ,44 offset,pcd 114.3 for an MR2 Rev 2 Turbo.

Can i just ask if the Fittment is right for it?

According to the website http://www.rochfordtyres.co.uk/Fitment.asp?psearch=Toyota

The PCD is 114 and offset is 35 - 42. So how can i make up the offset to 44?

Do i added spacers or...?

Cheers

I have read the guide but don't really understand it

[Jesus]

Spacers will bring them out a bit... but you may get away with 44mm offset.

My fronts are 7 x 17 and run a 35mm offset.

[Billy C]

I know it will bring them out a bit bit does it reduce the offset of 44 to say 39 (if you use 5mm spacers) or does it increase the offset to 49??

How (in English) does the offset work in terms of getting it correct?

Cheers

Will

[Jesus]

It would in effect make a 44mm offset sit like a 39mm offset.

This might help you... .: Clicky :.

Or this offset calculator... .: Clicky :.

Good luck.

[Bibbs]

also check the sticky threads .. FULL details about the PCD etc in there ..