Slave Clutch Cylinder

[BLOODUK]

Does anybody know how to replace this?

Is it an easy Job?

Where is it located?

Does anybody have a diagram ?

Mr2 Turbo Rev 2

pain in the **** with this damn clutch pedal

Push it down and let it fly up and it comes up normaly!

But if for example im riding the clutch so to speak

having to go slow up the driveway, or stuck in traffic

or slowly entering a parking space... the pedal would stick

and me having to lift the pedal.

Edit : cleaned out the Clutch fluid by bleeding and it was Disgusting

Almost totaly black, not clear at all

[Kelvyn]

If the pedal is sticking its more likely to be a problem at the master cylinder end rather than the slave cylinder. Have you checked out

http://www.mr2-tech.com/bgb/mechanical/volume2/clutch.htm ????

[BLOODUK]

I checked it , but that doesnt really help diagnose the problem

mearly helps to get it sorted :(

id much rather its the master than the slave

[BLOODUK]

Ok got a new master cylinder and it took hrs to sort out as we had many different directions to take going by other people's suggestions not just here but rouge systems aswell [-X

The master cylinder although was not working correctly, even we tried to bleed it air came out... so it looked as if someone fixed it before but left air in the system over a period of time the air slowly stopped the pressure from pushing the pedal back.

Got a new cylinder, bled it many many times till finnaly the pedal was coming up correctly and it was like a new car the biting point was higher up , no sticking pedal and changed gear perfectly!