Whats The Highest Bhp 1.3 E10

[carisma02uk]

ok i have a 1.3 e10 and have had i tuned up to 90bhp,

i am now adding a resistor which will add anything from 5-20bhp im expecting the lower end.

theni am adding a induction kit but i cant find a cone for my car but i am incontact with a chap who has a green cotton on his 1.3 e10.

if any one has any mods par no.s for me post em up.

if anyone has modding tips lets have them please.

oh and can any one tell me the highest bhp youve seen a 1.3 e10.

[Moffmo]

ok i have a 1.3 e10 and have had i tuned up to 90bhp,

i am now adding a resistor which will add anything from 5-20bhp im expecting the lower end.

theni am adding a induction kit but i cant find a cone for my car but i am incontact with a chap who has a green cotton on his 1.3 e10.

if any one has any mods par no.s for me post em up.

if anyone has modding tips lets have them please.

oh and can any one tell me the highest bhp youve seen a 1.3 e10.

←

I have a tip

DONT USE THE RESISITOR!!!!

[carisma02uk]

why

[Moffmo]

load of crap and dont work

[carisma02uk]

ive already bought it it only cost £4.00 so i aint to bothered.

im gonna try it and see first tho.

[MSC_Kev]

The resisitor will more then likely cause serious harm to your engine. I can't remember the full details now, but trust us when we say avoid using it!

It will do more harm then good!!

Kev

[Gti-Racing]

I also oppose the resistor, one i saw on eBay described it as fooling the ecu into thinking it was getting more cold air then it actually was, which common sence would tell you is BAAAD, si i wouldnt, aaand you get what you pay for, you pay nothing you get nothing!! they retailers of these are liars who dont tell you the side effects

[pitzo]

air filters are actually quite easy to get hold of for this car i purchased one from eBay in america for 12 dollars its advertised as for the 1.8 but the only differnce between all of the different kits is the length and shape of the connecting pipes mines fitted and sounds amazing!! grr not really much difference performance wise bit more edgy on the throttle but apart from that it just makes a nice noise!

[robw8246]

DONT FIT A CHIP TO YOUR CAR!!!

I did it to my 1.3 it DIDNT work :ffs: . It hasnt changed a thing on the power at all!!. :censor:

If your looking to chip your car do it properly- GREEDY do a chip that lets YOU adjust the system mapping on you computer- ive heard alot of good stuff about it and once ive payed my insurance and tax (the important stuff) i will look it to buying that and a airfilter on my 1.3

[carisma02uk]

cheers fellas im not using it now but i still need help on gaining bhp

my induction kit has added loads wich i thought was i bit strange as it is only universal.

you can hear it growl and suck through every gear im happy it works.

any other tips.

my next addtions list:

AFTER MY BODY KIT AND SPRAY.

full exhaust system

upgraded fuel regulator

and more tunes on a bimonthly basis

any ideas if this would be ok and please add more to my list.

prices dont matter im a good saver

[SAMURAI_COROLLA]

Alrite mate, good move avoiding the resistor! i would like to know about this cone, i fitted a k&n cone for a 1.6 to my 1.3 using stainless and a silicone reducer and it only makes a noise and as far as i know and my colleagues know a filter only makes a 'big' difference when hi-lift cams or a turbo is fitted. Go for a fse fuel pressure regulator, cheap power, same with removing the cat. before you even think about it dont go near fitting a turbo, its hassle and expensive, its not just the turbo you would need. dont forget if your going faster you need to stop faster, i have been doing 1300cc stocks for 3 years and being able to stop is important!! go for ebc green stuff pads (around £45-£55) ebc shoes for the rear (similar price as the pads) black diamond discs (around £110).

as for the most power i aint sure but i shud think 100-110bhp is the highest you are gonna get without spending £Ks.

what size wheels you got??

hope everything goes good!!

[carisma02uk]

cheers mate.

at the moment i am running around 100bhp and i havent even got manifold-full zust sytem, down pipe, etc...

i have just added a ecotek cg-26p valve today.

and at the mo im waiting for my wheels.

i think a turbo wouldnt work as 1.3's cant get enough power for this,

not yet anyway.

i have found a company that make ssuperchips for 1.3 e10 but its £300 notes and will only add around 5bhp.

if i remeber right.