Help Need With Headunit

[springeruk]

I was just fittin a new head unit in my car, and i drop the live wirer from the ignition onto the metal frame.. and being an idiot like i am i left the ignition on! There was a spark and now theres no power travelling down that wire. the only fuse I found for the radio is the 15amp "RAD CIG". That fuse is fine, but could there be another fuse somewhere?

Any help in finding the fault would be great...

Cheers

[System~G]

This might sound silly, but did you test the fuse with a multimeter? did you test all the fuses in the footwell with a multimeter? Fuses can blow below the visible section so they might *look* OK but aren't.

Why are you messing with bare ends of wires when there are ISO harness adaptors available for the MKII? It makes life so much easier ;)

[springeruk]

This might sound silly, but did you test the fuse with a multimeter? did you test all the fuses in the footwell with a multimeter? Fuses can blow below the visible section so they might *look* OK but aren't.

Why are you messing with bare ends of wires when there are ISO harness adaptors available for the MKII? It makes life so much easier ;)

←

The fuses are fine, the cig socket still works... and so does everything else that I can think of.

There were no harness's in the car when I bought it so I had to do abit of DIY, and I know that Ive got the correct wires. Ive ran out of ideas.