Hilux Grease Nipple Size?

[MeMo]

Before I order one of each possible size of 90 degree grease nipples for the HiLux

front wheel swivel bushes, does anyone know what size thread the nipples need to have? I suspect its an "M" size but which one? I found a brake bleed valve to fit the top bush but have to use a 90 dgree grease nipple for the lower bush or can't get at it with the grease gun.

Cheers me dears.

[Andy]

M6 should be the correct size, but some surfs owners have said M8, not sure why they are different.

You will find more info here.

http://www.yotasurf.co.uk/forums/index.php?referrerid=11

[MeMo]

M6 should be the correct size, but some surfs owners have said M8, not sure why they are different.

You will find more info here.

http://www.yotasurf.co.uk/forums/index.php?referrerid=11

←

OK, thanks I'll get both and let you all know. (Why do they put in blank screws and not grease nipples in the first place?)

M

LATER.....

Yep they're M6 screw size and 45degree angle heads will fit without fouling

lower suspension ironwork. Its a fiddle getting the bottom one fitted though.