Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

Recommended Posts

Posted

Hi, :)

Please could someone advise me on what Induction kit I should buy :help: ; is K&N any good as I heard you have to clean the filters every so often :unsure: , where as with more expensive ones you don’t. :wacko:

Is it worth spending the extra on an air filter i.e Apexi and if so where can I buy one? Sorry for the stupid questions but i'm a bit unsure at the moment if it’s worth buying an air filter or not.

Thanks. :thumbsup:

PurpleMR2


Posted

I have a PiperX induction kit on mine,

many people prefer full jap mods (ie HKS / Blitz etc)

but mines good enough for me, sounds sweet (sucks like mad with my new turbo)

also people recomend you get them sheilded of from the engine, to get max cool air !!

Posted
many people prefer full jap mods (ie HKS / Blitz etc)

but mines good enough for me, sounds sweet (sucks like mad with my new turbo)

also people recomend you get them sheilded of from the engine, to get max cool air !!

Hi,

Thanks for replying :thumbsup: What did you mean by a full jap mod? :unsure:

Was hoping is was going to be a five minute job of just bolting on the air filter. :lol:

I have been looking at a K&N 57i from Rogue Systems for £85.76 , unsure where else to look on-line, can anyone recommend any other websites.

Thanks again.

PurpleMR2

Posted

I only mean that K&N and PiperX is sometimes associated with 'Boy Racer' cars

Some Jap car enthuisiasts prefer to use only Jap parts like Blitz, HKS, Greddy, Apexi etc.....

But if you aint that worried then just go for a K&N or PiperX

Yes they are just bolt on, replace the air box.....easy

Rogue are MR2 specialists, so if they sell em, they must be ok !

Posted

On your NA

K&N you wont be disapointed.

Russ


Posted

I'ld spend around £100 and go for an APEXI, superb unit, great filtration and great sound. Will take about 15mins - 30mins to fit...

I used to have a HKS mushroom with the metal nitake pipe which did suond great on an NA but apparently not that good at filternig out the rubbish in the air....

APEXI was supposed to be the best unit available.

Posted

APEX'I :thumbsup:

Posted
many people prefer full jap mods (ie HKS / Blitz etc)

but mines good enough for me, sounds sweet (sucks like mad with my new turbo)

also people recomend you get them sheilded of from the engine, to get max cool air !!

Hi,

Thanks for replying :thumbsup: What did you mean by a full jap mod? :unsure:

Was hoping is was going to be a five minute job of just bolting on the air filter. :lol:

I have been looking at a K&N 57i from Rogue Systems for £85.76 , unsure where else to look on-line, can anyone recommend any other websites.

Thanks again.

PurpleMR2

I've got a K&N 57i kit and I'm pretty pleased with it. Its only about £10 for the cleaning stuff and you dont need to clean the filter that often, its well worth doing though.

Guest rev3turbo
Posted

Don't know too much bout N/A but,,,,

A'pexi on my tubby is awesome :thumbsup:

Posted

Apexi all the way getting myself one next month. When i finally get paid!!! :censor:

Posted

Cool, I see a lot of you are saying Apexi, but where can I get one for my Rev5 N/A can't find anywhere online!, just tried TBDevelopments but they are sold out! :censor:

:help:

PurpleMR2

Posted
Cool, I see a lot of you are saying Apexi, but where can I get one for my Rev5 N/A can't find anywhere online!, just tried TBDevelopments but they are sold out! :censor:

:help:

PurpleMR2

Have you tryed rougesystem.co.uk or .com normally on there for bout 100quid

Posted

Rogue Sytems only do the K&N NO Apexi. Where can you get an Apexi from...Anybody? :(

PurpleMR2

Posted

I still stand by my HKS Racing Suction kit. Change the filter regularly and you get no problems.

Full hard pipe from the filter to the turbo, so no vortexing whatsoever.

Most people criticise the HKS filters as they don't change them enough. They should be done every 2-3k miles, not 6k miles like some do.


Posted

apexi power intake kit! :)

Posted
apexi power intake kit! :)

OMG! How hard is it to buy or even find an Apexi kit on-line!!

It's turning into mission impossible! :crybaby:

Posted

This might help!

http://www.mkiv.com/techarticles/filters_test/2/

I have used the Blitz one and the HKS one.. both seem good to me!!

The results of that test are a bit worrying though!!!

Posted

Well today I made my mind up and ordered an A'pexi power intake kit, only trouble is that it's going to take 3 weeks before I receive it as it was out of stock at the moment. :crybaby:

Thanks to all that responded, I realise that like most mods it comes down to personal choice. :) Just hope I've made a good one! :lol:

Only 21 days to wait.

Cheers

PurpleMR2

Posted
Well today I made my mind up and ordered an A'pexi power intake kit, only trouble is that it's going to take 3 weeks before I receive it as it was out of stock at the moment. :crybaby:

Thanks to all that responded, I realise that like most mods it comes down to personal choice. :)  Just hope I've made a good one!  :lol:

Only 21 days to wait.

Cheers

PurpleMR2

hi was just wonderin where u got ur apexi from as i am havin the same problem as u.

also how much was it if u dnt mind me asking.

cheers :thumbsup:

Posted
Well today I made my mind up and ordered an A'pexi power intake kit, only trouble is that it's going to take 3 weeks before I receive it as it was out of stock at the moment. :crybaby:

Thanks to all that responded, I realise that like most mods it comes down to personal choice. :)   Just hope I've made a good one!   :lol:

Only 21 days to wait.

Cheers

PurpleMR2

hi was just wonderin where u got ur apexi from as i am havin the same problem as u.

also how much was it if u dnt mind me asking.

cheers :thumbsup:

Hi acstreet,

Check your mail. ;)

Cheers

PurpleMR2

  • 1 month later...
Posted

Hi,

Well I finally got my Apexi Power Intake today which has taken 6 weeks to arrive! :angry:

I have been told it's easy to fit but as im a complete novice, does anyone know where I can get a copy of the fitting instruction in english!

I know there are a couple of diagrams but my Japanese isn't that great! :lol:

:help:

Thanks again :thumbsup:

PurpleMR2

Posted

Have you used the "Search" button at the top of the page?

Look here for your answers to kit questions:

http://toyotaownersclub.com/forums/index.p...hlite=Induction

This induction/filter question has been asked soooooo many times now. People need to search before posting.

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Guest
This topic is now closed to further replies.






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Support