New Member Need Help

[entryisland]

spark plug wires ohms test results are #1=10.63k,#2=9.42k,#3=7.78k and #4=6.84k ohms.Pick up coil or sensor=217.5 ohms.Main coil=.5 ohms.voltage going to coil=+12.14 volts when you ground neg. test probe to engine block,but there is no voltage when you put neg. test probe to the other side of coil wire harness.Coil harness plug un-pluged for this test.seems to be no signal coming from the igniter box on this test. Question! what voltage should come from igniter to coil.Where can i get info book or wiring diagram of these circuits with expected voltages.does pick up coil or sensor wires goto computer or igniter and are there any fuses hid, I checked all I could find test was o.k. Thanks in advance.Allison chenell.