Were To Mod My Starlet?

[DanShep]

I am currently looking wanting to modify my starlet, but being the unheard of car it is I am struggling to find any were that does any specialised stuff. i know its not impossible as I have seen it done on these cars but to save time and get the best recomended sites I thought that a few people out there must be able to give me and others some useful advise!! Please help.

[starletmad_sr]

you could start of with a better exhaust i can recommend getting a twin exahust system in stanless steel that will be fitted to both sides of the car. like this for example.

O----O they look great on the car and the exit holes are 4 inchs each side. sounds beef.

if you looking for engine mods and havent got much money to play with maybe you could try getting a apex i induction kit. or a KandN air filter.

there isnt much out there in the ways of modify the car itself they mainly have to be one of creations for the bumpers and skirts or salvaged of something that might fix with some tweeks.

any one know any good wesbites for parts or TRD parts?

Andy SR

[joe's-inner-MONG]

dont know much about starlets. there are some parts you can get from toyota to update them.

my niece has one. good cars.

you could try fensport for handling bits and bobs or the uk starlet club for ideas.

[riko666]

I am currently looking wanting to modify my starlet, but being the unheard of car it is I am struggling to find any were that does any specialised stuff.  i know its not impossible as I have seen it done on these cars but to save time and get the best recomended sites I thought that a few people out there must be able to give me and others some useful advise!! Please help.

←

engine-wise: transplant a 4efte engine in there ;)

[Captain Starlet]

ive got a glanza rear spoiler for sale if your interested at all?

[wylo]

ive got a glanza rear spoiler for sale if your interested at all?

←

Interested mate! PM me

[ededdy]

I am currently looking wanting to modify my starlet, but being the unheard of car it is I am struggling to find any were that does any specialised stuff.  i know its not impossible as I have seen it done on these cars but to save time and get the best recomended sites I thought that a few people out there must be able to give me and others some useful advise!! Please help.

←

;) I hear that! Good news I've got away with head gasket N only thing I've fried is my FAN SENSOR SWITCH!

Any ideas guys with of the three control the fans cut in?

Cause that is the one thats not working! Thermo (well new one is letting coolent through, other is telling my gages what temp it is but fan not wanna cut in (so have amnnual fan on back up).

Right now minnor s**t over with how can I reduce my spool up time and get my 1/4 miles down cause want my good friend who killed me at santa pod! I want him to laugh on other side of his face!

I did 15.4 in the hottest of hot heat n he ran a ***** takeing 13.8!! & yet he doesn't know his BHP or FT LB mine was 182bhp and 176 ftl bl not sure if fly wheel or what but guessing it is from 1/4 mile times 1.8 years later (really need new rolling road session).

What do I need to do to my GT turbo to get it down to 13 flat bearing in mind I run 17" (i Konw too big for 1/4 but look so good!)also have full interior including AC!

Want to keep ac but everything else gotta go!

Just put my four 12" subs & amps etc...in my all show no go car, so what else!

Got about 3-4K to spend N don't want AMG 55's to get passed unless over 155mph (I know you need big CC for top end) I live in MK home of DamlerChylser N there every where most of em cant take a corner for s**t but if they could god help us!

What do I need to buy, make, fit, spk too etc....

Thanks guy!!!!

P.S

NE one know who own's the yaris turbo in MK gray/silver one?

[ededdy]

I am currently looking wanting to modify my starlet, but being the unheard of car it is I am struggling to find any were that does any specialised stuff.  i know its not impossible as I have seen it done on these cars but to save time and get the best recomended sites I thought that a few people out there must be able to give me and others some useful advise!! Please help.

←

Bin it and get a turbo or just buy all the turbo running gear for a stealth runner!

gona cost you about a £1000 if you can punt it all in your-self!

Or go buy one for £2k?

But the stealth idea much better I hate everyone knowing mine Is a tubo buy the big GT turbo down the side would rather the look on their face when just rip past with recuculating dump valve on the go!

Good luck! (you want a fast car start with a quick one in the first place!)

ED

Sorry all I may be a little ****** right now!

[DanShep]

no i don't to bin it! sell it then i have no car until i can get another so y would any sane person do that? why would i want to get rid of my engine better than almost any over 1.3 standard car! but i'v had a pair of rockford 6x9 installed on the parcel shelf by www.freewebs.com/jspectuning at really good price. started to gather prices for bits and pieces from r tec. jus waiting now to do a re-spray! ouch exspensive!

[jabran200]

you don't have to to dump a 4efte in there turbo the 4efe people have trubo'd the engine make sure u use 98 ron petrol and sort the fuelling out and you should be fine, ideally i would chnage the piston to forged ones or atleast 4efte ones.