Ae82 4agze Conversion

[twinnyrider]

hello everybody i just registered as i have an ae82 fwd corolla gt that i am fitiing with a 4agze engine, i purchased the engine from a breakers but they never had the ecu or loom i am not in the position to spend alot of cash but would like any help in locating a loom and ecu for 4agze engine. fensport wouldnt split so they cany help...............

please help i`ve done all the bodywork on the car and the interior just the engine left. its a real headturner!!!!!!!!!!!!!!

[Unity Jon]

try looking on http://www.turbocorolla.com or http://www.twincam.com they are both in Australia but the guys are very helpfull and have plenty of 4agze's knocking about so a wiring diagram should be easy to get, then the hard bit, modify your loom, although one multi-pin plug will be a git to duplicate.

good luck.

[TruenoGTV]

If you check out International eBay regular you might come accross 4agze ecus.

Anyway, is it an AFM or MAP GZE?

Do you have any pictures of the AE82?

[twinnyrider]

:D hi guys thanks for the replies, i`ve used that site a few times it is very helpful but i think i`m gonna start with a new loom as the one i have is just too knackered.

i`m not to sure how to put pictures up on this site, i`ll have a word with my computer wiz brother and get it sorted, you guys should like what i`ve done with it.

[L4AGZE]

Speak to Jon Barnes or email him. His website is http://www.jbmotorsport.co.uk

Jon is a top guy and has helped me source a number of parts and offered all the advice he can.

You will need a complete wiring loom and ECU though, depending what your plans are you could go for a stand alone replacement ECU. Also you need to identify which engine you have ie AE92 or AE101 and if it MAP or AFM to get the correct ECU.

[TWIN CAM ALLY]

Hi twinny rider welcome to the forum, what colour is your car is it the white 1 with the azev As and the louvres cut out in the front wings???

[twinnyrider]

hi twin cam ally, so you have seen my car about..... yeh thats my car the white one with azevs. its changed abit since you probably saw it last, i'm trying to get my engine finished.

thanx for that web address L4AGZE gonna try it out right now.

[TWIN CAM ALLY]

Hi TR do the asev As fit ok with no scraping coz I wanna geta set for myself, what inch are your wheels and where can you get em from?

I think the asevs suit that car the best out of all the wheels i've come across

[twinnyrider]

my wheels are 7and a half j wide and they are 16" rims, they prob would scrape a car with standard arches but i've blown my arches out on my car so dont have any problems.

if you want a new set they are hard to get hold of, only way is to go auto design technics in bradford and speak to a lad called snowy and see if he can get hold of some for you.

try eBay seen a few sets go on their.....

glad you like em bro! :D