Revision 6 Lights

[mhill]

I have just managed to get some revision 6 lights for the rear of the MR2, I don't have any instructions.

Can anyone help me or e-mail me with some instructions on how to wire these things up.

Thanks

[TheNissanMan]

Are you after help with the wiring, fitting, painting ??

[mhill]

I need help with the wiring, because the person I got them from cut the buch of cables so I don't really know which wire s to connect.

Hope that makes sense

[mhill]

I have finally got the lights fitted and wired, they look awesome.

The only problem I have, is the hole on the centre panel where the lock is, it is further away from the lock so the key dosn't fit in.

Can anyone advise

Thanks

[Heathy]

I had the same problem, just fill in the hole with some body filler and paint over it then either just use the handle inside the car to open the boot or do what I did and fit a remote boot popper.

[Bibbs]

I have finally got the lights fitted and wired, they look awesome. 

The only problem I have, is the hole on the centre panel where the lock is, it is further away from the lock so the key dosn't fit in.

Can anyone advise

Thanks

←

It'll be because your car is a rev1/2 and the centre pannel is for rev3+ ..