Help Needed With Light....

[edli83]

been trying to hook out footwell cathodes today and now the interior light will only work if its on the door setting(door open obviously).

The on setting doesnt do anything.....

what could I have done to it........

i used one of them tester screwdrivers on it and they both seem to have a full curcuit( lil red light comes on).

EDIT: it lights up in both modes.

any suggestions?

[DaveSR]

Im a little confused -

You fixed it then ....... and by hook out you mean take out?

[edli83]

meant to say hook up.

i done it now, with the light switch u need to have it screwed in for it to work.

wohooo got it all working now :D

[armoredfist2002]

yes the on function only works when the light is screwed back up as it screws into the car body so it's grounded.

I had trouble with mine the other week so I took my lights out, my interior light was on and the light on the dash was on saying the door was open and my doors wouldn't lock.

took the neon's out and the light went off and the doors would lock fine then.

don't know what the problem was but be careful just incase it happens