Removing Internal Door Panels!

[chrisb]

Could you give me a quick idea of how to remove the interior door panels on a gen6 (i think), its an S reg SR!

CB

[Leeky]

First undo the screw behind the doorhandle.

Remove the plactic piece and undo the bolt/screw(cant remember) behind.

Also using an electrical screwdriver you need to pop out the plastic clips from the underneath and rear of the door.

Remove the bolt which goes into the door via a hole just underneath the big handle.

Using the electrical screwdriver pop off the two plastic caps near the door hinge and undo the screws behind.

Pull the bottom of the door away and at the same time lift as the panel hangs on the door like a radiator hangs on a wall

[chrisb]

Cheers buddy!

CB

[Leeky]

Anytime