Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

Help: Starlet Turbo Diesel 1n-t (or Just A 1n With Turbo)?


Recommended Posts

Posted

Hi all, I have a 1995 starlet japenese import. It has a 1.5L diesel engine (1N). A few weeks ago a banging noise followed by a drop in power occured. Upon investigation it appears the big end bearing is gone. Anyway, I've sourced a replacment engine which is a turbo versiion of the same unit, from what I gather it's a 1N-T. It may have been fitted to a Tercel, Corolla II or similar. Mounts were slightly different than that of the starlet. I have this replacement almost ready to go in. However, I think some of the pipe fittings on the turbo unit are missing. Can anyone tell me what pipes should be connected where on this unit. Or even better still, advise where I can get a suitable workshop manual for this engine. It doesn't have to be from a starlet, I'm just interested in the engine part and its connections. All assistance greatly appreciated.

  • 7 months later...
Posted

Hi all, I have a 1995 starlet japenese import. It has a 1.5L diesel engine (1N). A few weeks ago a banging noise followed by a drop in power occured. Upon investigation it appears the big end bearing is gone. Anyway, I've sourced a replacment engine which is a turbo versiion of the same unit, from what I gather it's a 1N-T. It may have been fitted to a Tercel, Corolla II or similar. Mounts were slightly different than that of the starlet. I have this replacement almost ready to go in. However, I think some of the pipe fittings on the turbo unit are missing. Can anyone tell me what pipes should be connected where on this unit. Or even better still, advise where I can get a suitable workshop manual for this engine. It doesn't have to be from a starlet, I'm just interested in the engine part and its connections. All assistance greatly appreciated.

Hi all, I have a 1995 starlet japenese import. It has a 1.5L diesel engine (1N). A few weeks ago a banging noise followed by a drop in power occured. Upon investigation it appears the big end bearing is gone. Anyway, I've sourced a replacment engine which is a turbo versiion of the same unit, from what I gather it's a 1N-T. It may have been fitted to a Tercel, Corolla II or similar. Mounts were slightly different than that of the starlet. I have this replacement almost ready to go in. However, I think some of the pipe fittings on the turbo unit are missing. Can anyone tell me what pipes should be connected where on this unit. Or even better still, advise where I can get a suitable workshop manual for this engine. It doesn't have to be from a starlet, I'm just interested in the engine part and its connections. All assistance greatly appreciated.

Hi, just new to this and dont know if Im doing this right. I have a Toyota Starlet Diesel with a 1N Motor and mine run a Bearing also, there are two others I know of that have done the same and its always the No 1 on the crankshaft that runs the bearing, Im think there may be a Fault with the 1N Motor, or maybe lack of servicing? Ive just bought another Car also with a 1N Motor so I hope it doesnt do the same. Ive been trying to contact Toyota to see if there is a know Fault with the Motors, but havent had any reply as yet. I hope you can find the parts you are after and do you know of any problems with the Motors at All?. Thank you, Regards Peter.

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now





×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Support