Induction Kit!

[aygo vvti]

Hi yesterday i made an induction kit for my Aygo! and it sound awsome when you rev it up to the limiter (did not work well on fuel tough as i was putting it to the limiter all the time :!Removed!: ).

As i already had a Simota cone filter i bought a 90 degree bend rubber hose that goes tight in the rubber at the intake (which come visible after removing the airbox!) Then with the rubber hose in place i took an 8inch long steel pipe 2 inch diameter and took one side of it to 3inch on the mandrel my friend has (he is a silencer repair guy) so it fit the conefilter ,then i put a piece of pipe in the side for the bleeder pipe (you have to buy about 1 feet of this as the factory one is very short! and it looks something like this:

well mine looks even better ;) I will post some pics of mine as soon as i will take some!

[Daniel Pereira]

post them!! you should have done that already!! :D

[aygo vvti]

post them!! you should have done that already!! :D

i wil try to take them tomorrow! as i dont have a camera today and i need to spray the metal pipe as it will look better ;)