Error Code 51?

[cheetah1]

Hi!

When I check the errorcodes after I have reseted them, I get code 51.

The paper I got here sais "Switch Signal". What switch?

Okey, I have a theory as well.. :P

Could it have something to do with the ventilating fan to do, 'cause it wont run if I put it in Lo or 1. It runs only in 2 or Hi..

Another thing I thought it might be related to is my malfunctioning sidemirrors.. The electric motors thats supposed to move them doesn't work either.. none of them. And it's not a fuse, I've checked that.

Thanks!

//Cheetah

[Mick24]

Check the back of the Ignition Switch to make sure the electrical part of the Ignition switch is not loose as the retaining screw tends to loosen off.

Your heater fan not working on the 1st two positions is likely to be the fan resistor burnt out - mounted near the fan - rectangular plastic plate screwed onto the fan/ducting with a electrical connector on it.

Remove it and you will see one of the resistor coils burnt out.