How Do I?

[ur_m8]

ok on the side lights how u take off the front covering to give em a clean as the glue is strong as and dont want to brake the plastic casing?? in case Ur wondering why just want to get rid of the mold. not sure if it's easier to buy the a new front side light bit (the plasic cover bit where the bulbs go into). cheers for any help

[JappyBeast]

For the front side lights you take a flat ended screw driver to the gap between the main front and the side curved part (they are in 2 sections), it will pop out to expose the screw holes.

I wouldnt advise splitting the plastic to clean them,

You might want to go for some nice clears as they look great!

[ur_m8]

i get that bit as ther're off but how do i get the actual front bit of the lights off. oh cheers again u always seem to help. lookin at what u wrote i understand the bit u mean but ........ i wanna take em apart to clean?? :D

[Fizz]

you cant take them apart... What i did with mine was soak them in soapy water for a bit then used a hair dryer on them till no water remained.

[ur_m8]

you cant take them apart... What i did with mine was soak them in soapy water for a bit then used a hair dryer on them till no water remained.

oh rite cheers guess i'l;l just buy some clear ones

[Fizz]

you cant take them apart... What i did with mine was soak them in soapy water for a bit then used a hair dryer on them till no water remained.

oh rite cheers guess i'l;l just buy some clear ones

Will cost you about £40ish quid off eBay..

[ur_m8]

sorted just have to wait now. tar

[JappyBeast]

sorted just have to wait now. tar

Good buy, totally update the look of the front and look nice at night!