Noise From Drivers Side Wheel

[GLANZACHAPPY]

JUST A BRAIN PICKY WHEN I DRIVE GLANZA I HAVE A WHINING NOISE FROM DRIVERS WHEEL LIKE A VIBRATING NOISE SLOW SPEEDS ITS OK BUT FASTER THE LOUDER ANY IDEAS I TOOK WHEEL OFF BUT COULD NOT SEE ANYTHING THOUGHT IT MAY OF BEEN BEARING BUT THE SHAFT FASTENES STRAIGHT THROUGH THE BRAKE DISC CHEERS STEVE

[Boro Sera]

Wheel bearing by the sound of it !

[GLANZACHAPPY]

HOW DO I GET TO IT I TOOK WHEEL OFF TH REVEAL THE BOG LOCK NOT WITH PIN THROUGH TOO PIN OUT AND THE BIG NUT WILL NOT TIGHTEN ANYMORE SO DOES THIS MEAN THAT ITS ALREADY BEEN TOOK UP CHEERS

[Boro Sera]

you're slightly off track with this one.

The Big lock nut with the pin through it has nothing to do with the wheel bearing. The shaft that the nut fastens onto goes through the bearing.

To replace the bearing you have to remove the big nut, knock the splined shaft out of the hub, remove the hub and press the bearing out of it, preferably with a hydraulic press.

It's a straightforward job if you've got the right tools, but If you're just planning to mash it out with a hammer and some drifts then you'll do more damage than it's worth.

Take it to a garage - it's a routine job and they'll do it right for you. It won't take too long or cost too much ( obviously depending on where you go ! )

[GLANZACHAPPY]

HOW DO I GET TO IT I TOOK WHEEL OFF TH REVEAL THE BOG LOCK NOT WITH PIN THROUGH TOO PIN OUT AND THE BIG NUT WILL NOT TIGHTEN ANYMORE SO DOES THIS MEAN THAT ITS ALREADY BEEN TOOK UP CHEERS

thanks ill book it in cheers