What Upgrades Would I Need...

[TokeTillDeath420]

This may sound like a stupid question, but i never really learned about all the components that a turbo system needs to operate properly. Im interested in getting the TDO6S turbo, i was just wondering what other upgrades would i need? I know that i need new fuel injectors and as i was looking around alls i could find were 550cc Supra injectors... do these fit in the MR2? Would a need a certain blow off valve? Besides the fuel injectors what else would i need because 200 hp and cuttin it no more. Could this turbo cut it with a stock engine (i have an intake{HKS Super Mega Flow} and an exhaust{HKS Dual Dragger}). May sound like a lot of questions but i just got some money and before i spend it all i wanna buy parts for my car... Thanks... PEace B)

[Bibbs]

I don't know about that turbo, but you'd need an adaptor plate and water and oil lines.

To control it you'd also need a new ECU or a piggy back one.

If you are not after a huge increase, use the injectors out of the Gen3 engine (Rev3+ mr2) as these were bigger than the Gen2 (550 vs 440 I Think).

The HKS filter is know for good flow, but also poor filtration .. I used to have one and when I swapped it I found a small layer of dust on the intake pipes don't know how much wear this had done to the engine.

I'd suggest going for a hybrid turbo, at they'd use the stock one and then the water/oil lines are not needed as they are stock. But really, I'd get the intercooler, WI etc before hand and take the stock turbo to 17 psi (~20 on a Gen3) and seeing if that is good enough for your needs (300+ bhp).

If it's not, I know where GT28/30 & 35 turbos are about a grand.