Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

Avensis Key


billsinc
 Share

Recommended Posts

You can program an additional key into the Avensis 1998 - 06/2000 by following this sequence:

Open driver's door and insert programmed black key into ignition. Close door.

1). Within 15 seconds

Switch ignition on and off 4 times.

Switch ignition on.

Open and close the driver's door.

2). Within 20 seconds

Open and close driver's door 5 times.

Remove key from ignition.

3). Within 10 seconds

Insert black key to be programmed into ignition.

Switch on and leave for 1 minute.

Remove key.

Repeat step 3 for further keys.

To exit programming open and close the driver's door.

If your key is grey in colour then it cann't be used to program additional keys. I can cut Toyota / Lexus keys at a very reasonable cost. Email me for details.

If you do not have a programmed black key for the vehicle I can recode the engine ECU. Again, email me for details. Please state model, year of manufacture and engine type (VVTI or not VVTI).

Regards.

Pat

What is your email address? Got it!

Link to comment
Share on other sites

  • 4 weeks later...

I'm a bit confused now. I have a key for my '99 Avensis on which the remote "unlock" does not work, but the "lock" does. I also have a perfectly functioning key.

Both keys will open the doors when used in the lock, but both set off the Alarm Siren when I do this.

If I buy a brand new blank key for an Avensis, get it cut, and follow the instructions (opening doors, closing them, standing on your head etc) will the new key then work for remote central locking? Will it disarm the alarm?

Alternatively, can I easily disable the Alarm Siren altogether?

Link to comment
Share on other sites

  • 3 weeks later...

Hi, I have a problem with my C/L but only when using the key. The doors all lock OK if i press the C/L button in the car, but using the Unlock/Lock buttons on the key does not lock or unlock the doors.

All i get is my hazards flashing twice but no locking action - can anyone help??

Link to comment
Share on other sites

Hi, I have a problem with my C/L but only when using the key. The doors all lock OK if i press the C/L button in the car, but using the Unlock/Lock buttons on the key does not lock or unlock the doors.

All i get is my hazards flashing twice but no locking action - can anyone help??

My Avensis is a 1998 model 1.8 R reg. I read the instructions for adding an additional key but will this solve my problem?? (key won't activate C/L)...

Link to comment
Share on other sites

Have only got one key for my W reg Avensis. The dealers tell me it is £150 to get a spare. Does anybody know anywhere less expensive?

Try Timpson's they can do it for a lot less. They can get the code from your car key and cut you a new one.

Link to comment
Share on other sites


  • 3 weeks later...
Have only got one key for my W reg Avensis. The dealers tell me it is £150 to get a spare. Does anybody know anywhere less expensive?

Try Timpson's they can do it for a lot less. They can get the code from your car key and cut you a new one.

I have tried Timpson's. They expalined they could not do it as it has a rolling code, and that it would need to be from the dealer. I told hi th eprice he thought I was having a laugh!

Link to comment
Share on other sites

.......it would need to be from the dealer. I told hi th eprice he thought I was having a laugh!

When I asked main dealer about a key he told me about £160, I asked if he was taking the p*&% :eek: . He looked at me and said with a straight face "No!" :) I left, as any normal person would. :blink:

Link to comment
Share on other sites

  • 1 year later...

i have a 1.6 avensis vvti gs. i have lost the only key that i had. is there any way around it than replacing the locks and the engine ECU as advised by toyota dealers. I really would appreciate any helpful advice. can it be reprogrammed. i am really stuck.

whats your email pete

Link to comment
Share on other sites

You can program an additional key into the Avensis 1998 - 06/2000 by following this sequence:

Open driver's door and insert programmed black key into ignition. Close door.

1). Within 15 seconds

Switch ignition on and off 4 times.

Switch ignition on.

Open and close the driver's door.

2). Within 20 seconds

Open and close driver's door 5 times.

Remove key from ignition.

3). Within 10 seconds

Insert black key to be programmed into ignition.

Switch on and leave for 1 minute.

Remove key.

Repeat step 3 for further keys.

To exit programming open and close the driver's door.

If your key is grey in colour then it cann't be used to program additional keys. I can cut Toyota / Lexus keys at a very reasonable cost. Email me for details.

If you do not have a programmed black key for the vehicle I can recode the engine ECU. Again, email me for details. Please state model, year of manufacture and engine type (VVTI or not VVTI).

Regards.

Pat

Hi

I have a 2005 Highlander which the ignition key has the imobiliser and 2 buttons 1 to unlock and 1 to lock.

I have broken the casing and my Toyota dealer in New Zealand says I cannot buy just the casing.

Can you get

Thanks.

Paul

Link to comment
Share on other sites

I had the same problem - only one key.

I'd bought the car as a part exchange from a garagek so never met the previous owner - however I looked up the address on the V5 on www.bt.com, looked up the name and phone number and phoned them up, he had a hunt around and found the spare key + the valet key!

Completed worthless to him, but toyota world bristol wanted £201 PER KEY!!! Daylight robbery!

So I swapped £402 pounds worth of keys for a box of quality street when I went to pick them up!

So my advice is, try to contact the previous owner and see if they still have the keys lying around.

Link to comment
Share on other sites

  • 1 month later...

You can program an additional key into the Avensis 1998 - 06/2000 by following this sequence:

Open driver's door and insert programmed black key into ignition. Close door.

1). Within 15 seconds

Switch ignition on and off 4 times.

Switch ignition on.

Open and close the driver's door.

2). Within 20 seconds

Open and close driver's door 5 times.

Remove key from ignition.

3). Within 10 seconds

Insert black key to be programmed into ignition.

Switch on and leave for 1 minute.

Remove key.

Repeat step 3 for further keys.

To exit programming open and close the driver's door.

If your key is grey in colour then it cann't be used to program additional keys. I can cut Toyota / Lexus keys at a very reasonable cost. Email me for details.

If you do not have a programmed black key for the vehicle I can recode the engine ECU. Again, email me for details. Please state model, year of manufacture and engine type (VVTI or not VVTI).

Regards.

Pat

your pm inbox is full

Link to comment
Share on other sites

  • 3 weeks later...

If its a new key with the lock/unlock unit within it try this;

All doors closed. Key not in cylinder

Insert already registered master key in cylinder

WITHIN 15 SECONDS, switch ignition LOCK - ON 5 times

WITHIN 20 SECONDS, OPEN/CLOSE drivers door 6 times ending with door closed

WITHIN 10 SECONDS, Remove master key

Insert new, unregistered key,

WITHIN 10 SECONDS, keep ignition at 'ON' position for 60 seconds or more

TO REGISTER MULIPLE KEYS, insert new key and repeat above step,

TO FINISH, open/close drivers door.

If programmed successfully, engine will start but leave running for at least 3 mins

to ensure communication between key and immobiliser ECU.

Link to comment
Share on other sites

It sounds like the alarm is over-riding the central locking system. Try removing the lower dash panel underneath steering wheel. You'll see a black box on the fusebox. This is the integration relay. Disconnect the multiplug and remove the integration relay from the fusebox for a few minutes then refit it and reconnect multiplug, Central locking should work from remote keys now. The alarm takes priority over the central locking thus not locking the car but setting the alarm. Hope you find this info useful.

It sounds like the alarm is over-riding the central locking system. Try removing the lower dash panel underneath steering wheel. You'll see a black box on the fusebox. This is the integration relay. Disconnect the multiplug and remove the integration relay from the fusebox for a few minutes then refit it and reconnect multiplug, Central locking should work from remote keys now. The alarm takes priority over the central locking thus not locking the car but setting the alarm. Hope you find this info useful.

Link to comment
Share on other sites

  • 1 year later...

Hi mate ,

I have Toyota Avensis 2003 VVTI,T4.I ahve got a spare transpodner with cut blade but I can not programm it?.Could you help.My email is tczwoju@o2.pl

Cheers

Wojciech

If you don't need to have a remote in the spare then you can get 'coded' keys probably from Toyota for around £30-40 as I paid £32 for one on my old Primera but just didnt bother having the remote bit in it - after all it is only a spare for just in case, and if you do lose it then get a remote.
Link to comment
Share on other sites


hi mate,

I nave read info in your post that you can be helpful to program additional key.I have Avensis 2003,2.0VVTI automatic.And I have second hand key which has been program for another car.SO Do you know how to program this key to my car?.I have main key ofcourse.

Cheers

Wojciech[

quote name=Patrick Boyle' date='Nov 26 2003, 09:24 AM' post='42065]

You can program an additional key into the Avensis 1998 - 06/2000 by following this sequence:

Open driver's door and insert programmed black key into ignition. Close door.

<span style='color:blue'>1). Within 15 seconds</span>

Switch ignition on and off 4 times.

Switch ignition on.

Open and close the driver's door.

<span style='color:blue'>2). Within 20 seconds</span>

Open and close driver's door 5 times.

Remove key from ignition.

<span style='color:blue'>3). Within 10 seconds</span>

Insert black key to be programmed into ignition.

Switch on and leave for 1 minute.

Remove key.

Repeat step 3 for further keys.

To exit programming open and close the driver's door.

If your key is grey in colour then it cann't be used to program additional keys. I can cut Toyota / Lexus keys at a very reasonable cost. Email me for details.

If you do not have a programmed black key for the vehicle I can recode the engine ECU. Again, email me for details. Please state model, year of manufacture and engine type (VVTI or not VVTI).

Regards.

Pat

Link to comment
Share on other sites

  • 4 months later...

Hello All,

Because I had only one master (black) key for my car as most people here I wanted to have a spare one in case I lose the master.

I got exactly the same key (2 button, black - Valeo on the blade, Kostal 433.92 MHz on the case) from eBay with same part number. Had a new blade cut. Replaced the blade on the key, managed to get the remote working. However for some reason I cannot get the new key registered with the immobiliser on my Avensis 1.8 1999 using the Pat's instruction below. Anybody in the same situation?

I noticed that when I finish the step 1 from the instruction below the security LED on the central console comes on which is perhaps to say that the car is now in programming mode.

I could hear a very low clicking noice when I insert the new key for 30 sec ( a relay or something) which is not there when I insert the original key. I assume that the system is trying to programme/read the code of the chip for some time and then it gives up.

Also when I finish step 2 the indicators flash a few times , sometimes 1 sometimes 2 times.

I couldn't find any reference to such flashes.

Could you help please with the following:

1. Does anybody know what these flashes mean?

2. Do I need to erase the old keys first?

3. Anybody knowing what the clicking noise might mean?

4. Any other ideas?

Cheers

You can program an additional key into the Avensis 1998 - 06/2000 by following this sequence:

Open driver's door and insert programmed black key into ignition. Close door.

1). Within 15 seconds

Switch ignition on and off 4 times.

Switch ignition on.

Open and close the driver's door.

2). Within 20 seconds

Open and close driver's door 5 times.

Remove key from ignition.

3). Within 10 seconds

Insert black key to be programmed into ignition.

Switch on and leave for 1 minute.

Remove key.

Repeat step 3 for further keys.

To exit programming open and close the driver's door.

If your key is grey in colour then it cann't be used to program additional keys. I can cut Toyota / Lexus keys at a very reasonable cost. Email me for details.

If you do not have a programmed black key for the vehicle I can recode the engine ECU. Again, email me for details. Please state model, year of manufacture and engine type (VVTI or not VVTI).

Regards.

Pat

Link to comment
Share on other sites

  • 2 months later...
You can program an additional key into the Avensis 1998 - 06/2000 by following this sequence:

Open driver's door and insert programmed black key into ignition. Close door.

1). Within 15 seconds

Switch ignition on and off 4 times.

Switch ignition on.

Open and close the driver's door.

2). Within 20 seconds

Open and close driver's door 5 times.

Remove key from ignition.

3). Within 10 seconds

Insert black key to be programmed into ignition.

Switch on and leave for 1 minute.

Remove key.

Repeat step 3 for further keys.

To exit programming open and close the driver's door.

If your key is grey in colour then it cann't be used to program additional keys. I can cut Toyota / Lexus keys at a very reasonable cost. Email me for details.

If you do not have a programmed black key for the vehicle I can recode the engine ECU. Again, email me for details. Please state model, year of manufacture and engine type (VVTI or not VVTI).

Regards.

Pat

Link to comment
Share on other sites

You can program an additional key into the Avensis 1998 - 06/2000 by following this sequence:

Open driver's door and insert programmed black key into ignition. Close door.

1). Within 15 seconds

Switch ignition on and off 4 times.

Switch ignition on.

Open and close the driver's door.

2). Within 20 seconds

Open and close driver's door 5 times.

Remove key from ignition.

3). Within 10 seconds

Insert black key to be programmed into ignition.

Switch on and leave for 1 minute.

Remove key.

Repeat step 3 for further keys.

To exit programming open and close the driver's door.

If your key is grey in colour then it cann't be used to program additional keys. I can cut Toyota / Lexus keys at a very reasonable cost. Email me for details.

If you do not have a programmed black key for the vehicle I can recode the engine ECU. Again, email me for details. Please state model, year of manufacture and engine type (VVTI or not VVTI).

Regards.

Pat

I have a 2.0td avensis estate, on a w reg, lost the original key, got a new one made from toyota but it will not start car can you help please
Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Support